572636
5
Zoom out
Zoom in
Previous page
1/14
Next page
Remove the IR from the carrying case.
Turn the knob of the battery cover 90° counterclockwise, remove the
cover and install two AA batteries as indicated (see illustration). Close
the cover and lock.
Attach the IR illuminator to the Weaver rail (1) and tighten the locking
screw.
Switch on the IR Illuminator by pushing the “ON/OFF” button (2), the
red LED indicator (5) lights up.
To adjust the beam from spot to flood, rotate the lens holder (3) until
you get the best image through your night vision riflescope/device.
To adjust the IR power, rotate the controller (4).
After use switch off the IR by pushing the “ON/OFF” button (2) - the red
LED indicator goes out.
The housing of the flashlight can be cleaned with a soft cloth. Do not
use an abrasive cloth/chemical cleaning solutions. Always use
cleaning equipment designed for photographic equipment. Dust can
be removed from the lens with a soft brush. The lens can be cleaned
with any cloth designed for cleaning optical equipment. Do not pour
lens cleaner on the lens itself!
adjust beam from spot to flood;
smoothly adjust power depending on viewing conditions.
The IR Flashlights are equipped with a standard Weaver mount which allows
you to affix the auxiliary IR to Pulsar devices with a Weaver rail. The Pulsar-
805 is suitable for use with analog night vision riflescopes (such as the
Sentinel Gen.1, Sentinel GS, Sentinel G2+, Phantom G2+), and
monoculars (e.g. the Challenger series). The Pulsar-940 can be employed
with digital riflescopes Digisight N550 and digital monoculars (e.g. units of
the Recon series). You can also use them as hand-held units.
Note: If you need to adjust the IR spot position, turn the locking ring (6)
5-10 degrees counter-clockwise. Match the IR spot with the image
viewed through a night vision device by moving the IR lens holder (3)
transversely. Tighten the locking ring (6).
Caution! During operation rings of the radiator become hot, which is normal
and is not a defect .
3
Инфракрасные фонари Pulsar-805 и Pulsar-940 предназначены для
дополнительной подсветки лучами ИК диапазона (невидимыми в Pulsar-940)
объектов наблюдения при использовании приборов ночного видения в
условиях, близких к полной темноте (отсутствие луны ночью, сильная
облачность и т.д.). Применение фонарей Pulsar позволяет:
существенно увеличить дальность наблюдения;
производить безошибочную идентификацию объекта наблюдения;
детально рассмотреть любой выбранный объект;
регулировать размер светового ИК-пятна в зависимости от
дистанции;
79071
24
200
0-2003
805
5,7-10
3 (2xAA)
2
- 20°С ...+40°С
132x45x52
140/190
 79076
24
200
0-2003
940
5,7-10
3 (2xAA)
2
- 20°С ...+40°С
132x45x52
140/190
ИК-фонарь Pulsar-805/940
Чехол
Две батареи типа АА
Переходник для установки на приборы с гнездом 1/4”
Салфетка для чистки линз
Инструкция по эксплуатации
22
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pulsar 805 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pulsar 805 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info