Manual Proxxon WP-E (page 10 of 58) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Spanish)

782243

Zoom out

Zoom in

1/58

- 10 -

 &69205.>0;/;/,+,=0*,

(<;065

For your own safety, wear protective goggles and hear-

ing protection when you work with the device!

(<;065

While working, ensure that the workpiece is held

securely! Flying workpiece parts pose a hazard!

(<;065

Never press the lock button for spindle locking when the

device is switched on. This could cause mechanical

damage!

&69270,*,*3,(505.

Naturally enough, it is essential that a dirty workpiece

be cleaned thoroughly prior to polishing! Use of sand-

paper is helpful here. Appropriate sanding sheets with

a touch fastener layer are available in our range

(www.proxxon.com).

630:/05.

&(9505.

Please ensure that the polishing tool is in a perfect con-

dition and not worn or damaged. Parts can break off and

fly about if polishing tools are worn or damaged. This

could result in injuries.

3,(:,56;,

Never work without polishing agent! Please note that the

ingredients of different polishing agents play a decisive

part in achieving the polishing effect, not the mechani-

cal action of the polishing tool!

Therefore, the choice of polishing agent, whether emul-

sion, wax or paste, is decisive if the desired result is to

be achieved. Please ensure that the correct agent is

selected for the material to be polished and the respec-

tive working stage.

A tube (75 ml) of metal polishing paste is included in the

WP/E angle polisher scope of delivery. A replacement

can be obtained from retailers, and these also stock fur-

ther polishing agents of all types.

Application of the polishing agent is most expedient with

the enclosed blue polishing sponge. This procedure

should be realised at as low a speed as possible to avoid

the polishing agent splashing about.

Following application of the polishing agent to the sur-

face to be polished, the polishing process can be con-

tinued as required with the polishing felt disc and pol-

ishing hood.

The complete procedure should, depending on require-

ments, be repeated until the desired result is achieved.

Finally, the workpiece should be cleaned of residual pol-

ishing agent using the microfibre cloth.

 **,::690,:-69;/,& (5.3,7630:/,9

Naturally enough, all the items described above (except

metal polishing paste) are also available as accessories

from Proxxon.

 (9,(5+4(05;,5(5*,

The device is broadly maintenance-free. For a long ser-

vice life, you should clean your unit after every use with

a soft cloth or brush.

The exterior of the housing can be cleaned with a soft,

possibly damp cloth. A mild soap or other suitable clean-

ing agent may be used during this. Solvents or cleaning

agents containing alcohol (e.g. petrol, cleaning alcohols

etc.) should be avoided, since these can attack plastic

casings. In any event, make absolutely certain that no

liquids penetrate into the interior of the device.

!,73(*05.$:05.;/,9<)),9)(*205.+0:*0.

&(9505.

For the following steps, it is imperative that you dis-

connect the mains plug of the device!

(<;065

A worn or damaged rubber backing disc should be

replaced immediately! Never operate your WP/E with a

defective rubber backing disc or defective polishing

tools! Risk of breakage and injuries!

A new rubber backing disc is available commercially

under the article number 28548.

1. Press the lock button 1 carefully.

2. Using a suitable screwdriver, release and unscrew

the check screw 2. Caution: The shaft may rotate as

well somewhat until the lock button “finds” its cor-

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Proxxon WP-E in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 1.85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Proxxon WP-E Manual

Product: