782206
7
Zoom out
Zoom in
Previous page
1/26
Next page
-7-
Table 1
Minimum gage for cord
Effective date for Table 1changed from November 1, 1995 to
November 11, 1996
AmpereRating Volts Total length of cordinfeet
120 V25ft. 50 ft. 100 ft. 150 ft.
240 V50ft. 100 ft. 200 ft. 300 ft.
MoreNot MoreAWG
Than Than
06 18 16 16 14
61018161412
10 12 16 16 14 12
12 16 14 12 Not Recommended
Legend (Fig. 1)
1. Main spindle
2. Lathe chuck
3. Turning tool holder
4. Rotating centre
5. Flange surface for milling unit
6. Sleeve
7. Clamp screw for sleeve
8. Tailstock
9. Sleeve adjusting handwheel
10. Handwheel for leadscrew
11. Clamp screw for tailstock
12. Leadscrew
13. Adjusting handwheel for top slide
14. Topslide
15. Support
16. Cross-slide
17. Adjusting handwheel for cross-slide
18. Clutch switch for automatic feed
19. Drive gearbox cover with speed table
20. Switch for anticlockwise rotation stop clockwise rotation
21. Main switch
22. Function display
23. Control
24. Hollow hexagon wrench
25. Lathe chuck wrench
Description of the machine
The PROXXON lathe PD 250/E is an extensible system which
consists of
solid shaft electronics for high torques over the entirespeed range
•automatic feed
•lathe chuck and
•rotating centre
for machining steel, brass, aluminium and plastics.
It can also be used for face turning, longitudinal turning and
thread cutting.
The machine is also suitable for boring, milling work and grooving
by using the appropriate accessories.
The ribbed, grey cast iron machine bed with ground prismatic
guideways ensures vibration-free work.
Warning
This Lathe is for indoor use only.Donot expose to rain or use in
damp locations.
Do not attempt to modify this tool or create accessories not
recommended for use with this tool. Any such alternation or modi-
fication is misuse and could result in hazardous condition leading
to possible serious injury.
Technical data:
Centredistance 9.8” (250 mm)
Centreheight 2.76" (70 mm)
Height above support 1.7" (43 mm)
Holding capacity
–Inner jaws 0.1" to 1.1" (2 -27mm)
–Outer jaws 1" to 2.8" (25 -75mm)
Cross-slide travel 2.4" (60 mm)
Topslide adjustment 1.8" (45 mm)
Spindle bore0.4" (10.5 mm)
Nose support on chuck side MK1/short
Tool holder 0.3" x0.3" (8x8 mm)
Machine dimensions approx. 22" x10,63" x6,7"
(560 x270 x170 mm)
Weight approx. 26,5 lb
Possible thread leads 0.5, 0.625, 0.7, 0.75, 0.8, 1.0, 1.25, 1.5 mm
Spindle speeds
–byshifting the V-belt 300/900/ and 3000 rpm
–bycontrol 25% to 100%
Feed 0.05 and 0.1 mm/revolution
Sleeve motion 1.2”
Sleeve for morse taper MK 1/short
Motor
Voltage: 115 Volt, 60 Hz,~
Power consumption 140 Watt
Noise emission 70 dB (A)
Only to be operated in closed rooms!
Do not dispose of the electrical device
in the household waste!
Always work with hearing protection!
Wear safety glasses!
Installation and setting up
Warning
To avoid injury from unexpected starting or electrical shock, do not
plug the power cordinto apower source receptacle during
unpacking and assembly.This cordmust remain unplugged
whenever you areworking on the lathe.
If any part is missing or damaged, do not plug the lathe in until the
missing or damaged part is replaced, and assembly is complete.
To avoid electrical shock, use only identical replacement parts
when servicing grounded tools.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Proxxon PD 250-E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Proxxon PD 250-E in the language / languages: English as an attachment in your email.

The manual is 3.73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info