782204

Proxxon MICROMOT 50-E Manual

6
Zoom out
Zoom in
Previous page
1/7
Next page
- 7 -
Description of the machine
Note:
The set 38515 icludes additionally:
1 Power unit
1 set of tools, see page 8
1 flexible shaft, see also page 8
Legend
1. ON - OFF switch with speed control (MM 50/E only)
2. Retainer
3. Connecting cable
4. ON - OFF switch (MM 50 only)
5. Lock button
6. Clamping nut with collet
7. Housing cap
Functional Description
The PROXXON Rotary Tool Micromot 50 / Micromot 50/E
is the ideal tool for precise drilling, milling, grinding,
polishing, brushing. It can be used for cutting, for engraving
and to remove rust. For hobby electronics, model making,
precision mechanics, jewellery shops, opticians, arts, tool
and mould making. For marking tools and cameras. It can
be used on steel, non-ferrous metals, glass, plastic
materials, wood, minerals and ceramics. The drill spindle is
supported in a precision ball bearing which eliminates any
play. Excellent handling because of the pen-type grip. The
machine is reliably driven by a high torque motor. Type
50/E is fitted with an electronic speed regulator.
Technical data
Length: approx. 9" (220 mm)
Weight: approx. 1/2 lb (230 g)
Spindle collar: Ø 3/4" (20 mm)
Motor:
Speed (50): 20 000 rpm
Speed (50/E): 5000 to 20 000 rpm
Voltage: 12 to 18 V
Power draw: approx. 40 W
Noise level: ≤70 dB (A)
Operation
Clamping, changing tools
Warning:
Never press the locking pin (arrow Fig. 2) while the
machine is running.
– Turn the clamping nut 1 (Fig. 2) lightly while pressing the
lock button until the pin engages.
– Open the collet and change the bit.
Clamp all tools as short as possible. Shafts, which stick out
too far will easily bend causing the machine to vibrate.
Power supply:
Use only power units with a minimum power of 1 A. We
strongly recommend to use the PROXXON adaptors type
NG 2 (S/E) or the NG 5/E or the included power suppy
(only 38515).
Warning:
Do not use a power unit with external speed control in
combination with the Micromot 50/E !
1. Push the non-reversible plug into the power unit.
In case of overloading the PROXXON-power unit will
switch off automatically. Pull the mains plug out and let the
power unit cool down for some minutes.
Working with the machine
Warning:
Always wear goggles!
Do not use any broken grinding discs or bent shafts!
Wear a breathing mask when working under dusty
conditions!
2. Start the machine on switch 4 (Fig. 1) or set the correct
speed (50/E only) with the button 1
Note:
High performance is not achieved by high pressure but by
even speed!
Small tools = high speed
Big tools = low speed
3. For delicate work hold the tool like a pen (Fig. 3). Keep
the ventilation slots open.
4. For rough work hold the machine like a hammer
The electronic speed regulation works only with non-
stabilized power units (like for example all PROXXON-
power units). In connection with a battery the machine will
only run at high speed.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Proxxon MICROMOT 50-E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Proxxon MICROMOT 50-E in the language / languages: English as an attachment in your email.

The manual is 0.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info