782207
4
Zoom out
Zoom in
Previous page
1/10
Next page
- 4 -
Operating Instructions
Micro Milling Machine MF 70
Dear Customer,
By purchasing your PROXXON Micro Milling Machine
MF 70, you have chosen a good-quality, high-grade
machine. The PROXXON MF 70 MICRO Milling Machine
is equipped with the proven KT 70 microcoordinate
table. This enables you to perform small, precise milling
operations on metal, plastics or wood. In order to
operate the milling machine and the accompanying
accessories safely and correctly, please read the
enclosed safety information and operating instructions
prior to operation.
This instruction manual covers:
• safety regulations
operation and maintenance
• spare parts list
Please read carefully!
Using this instruction manual will
make it easier for you to get used to the machine,
help prevent faults occurring due to improper use and
increase the service life of your machine.
Keep this instruction manual in an easily accessible place.
Only operate this machine if you are qualified to do so
and follow the guidelines in this instruction manual.
PROXXON does not accept responsibility for the safe
functioning of the machine
• if it is handled in a manner which constitutes improper
use,
• if it is used for other purposes which are not specified
in the instruction manual,
• if the safety regulations are not observed.
Warranty claims are invalid if
• the machine is incorrectly operated,
• the machine has not been sufficiently maintained.
In the interests of your safety, please always observe
the safety regulations.
Only use genuine PROXXON spare parts.
We reserve the right to make further alterations for the
purpose of technical progress.
We wish you every success with your machine.
General safety instructions:
1. REMOVE ADJUSTING KEYS AND WRENCHES. Form
habit of checking to see that keys and adjusting
wrenches are removed from tool before turning it on.
2. KEEP WORK AREA CLEAN. Cluttered areas and
benches invite accidents.
3. DON'T USE IN DANGEROUS ENVIRONMENT. Don't
use power tools in damp or wet locations, or expose
them to rain. Keep work area well lighted.
4. KEEP CHILDREN AWAY. All visitors should be kept
safe distance from work area.
5. MAKE WORKSHOP KID PROOF with padlocks,
master switches, or by removing starter keys.
6. DON'T FORCE TOOL. It will do the job better and
safer at the rate for which it was designed.
7. USE RIGHT TOOL. Don't force tool or attachment
to do a job for which it was not designed.
8. USE PROPER EXTENSION CORD. Make sure your
extension cord is in good condition. When using an
extension cord, be sure to use one heavy enough
to carry the current your product will draw. An
undersized cord will cause a drop in line voltage
resulting in loss of power and overheating. Table 1
shows the correct size to use depending on cord
length and nameplate ampere rating. If in doubt,
use the next heavier gage. The smaller the gage
number, the heavier the cord. Exception No. 1: The
reference to the table and the table itself may be
omitted if a statement indicating the appropriate
gage and length is incorporated into the instruction.
Exception No. 2: The information regarding
extension cords need not be provided for a
permanently connected tool.
9. WEAR PROPER APPAREL. Do not wear loose
clothing, gloves, neckties, rings, bracelets, or other
jewelry which may get caught in moving parts.
Non-slip footwear is recommended. Wear
protective hair covering to contain long hair.
Exception: The reference to gloves may be omitted
from the instructions for a grinder.
10. ALWAYS USE SAFETY GLASSES. Also use face or
dust mask if cutting operation is dusty. Everyday
eyeglasses only have impact resistant lenses, they
are NOT safety glasses.
11. SECURE WORK. Use clamps or a vise to hold work
when practical. It's safer than using your hand and
it frees both hands to operate tool.
12. DON'T OVERREACH. Keep proper footing and
balance at all times.
13. MAINTAIN TOOLS WITH CARE. Keep tools sharp
and clean for best and safest performance. Follow
instructions for lubricating and changing
accessories.
14. DISCONNECT TOOLS before servicing; when
changing accessories, such as blades, bits, cutters,
and the like.
15. REDUCE THE RISK OF UNINTENTIONAL
STARTING. Make sure switch is in off position
before plugging in.
16. USE RECOMMENDED ACCESSORIES. Consult the
owner's manual for recommended accessories. The
use of improper accessories may cause risk of
injury to persons.
17. NEVER STAND ON TOOL. Serious injury could
occur if the tool is tipped or if the cutting tool is
unintentionally contacted.
18. CHECK DAMAGED PARTS. Before further use of
the tool, a guard or other part that is damaged
should be carefully checked to determine that it will
operate properly and perform its intended function -
- check for alignment of moving parts, binding of
moving parts, breakage of parts, mounting, and any
other conditions that may affect its operation.
A guard or other part that is damaged should be
properly repaired or replaced.
19. DIRECTION OF FEED. Feed work into a blade or
cutter against the direction of rotation of the blade
or cutter only.
20. NEVER LEAVE TOOL RUNNING UNATTENDED.
TURN POWER OFF. Don't leave tool until it comes
to a complete stop.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Proxxon MF 70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Proxxon MF 70 in the language / languages: English as an attachment in your email.

The manual is 0.68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Proxxon MF 70

Proxxon MF 70 User Manual - English, German, Dutch, Danish, French, Italian, Swedish, Turkish, Spanish - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info