Manual Proxxon LHW (page 13 of 78) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Spanish)

782216

Zoom out

Zoom in

1/78

- 13 -

• Take breaks if necessary when working with the device!

Commissioning and operation

General handling of the device:

CAUTION!

• Do not work with damaged or worn bits and cutters!

Make sure the tools are in perfect condition. Damaged

or worn tools can break and cause injuries!

• Never press the lock button if the bits and cutters and

are still rotating.

• Please note: The utilised bits and cutters may not ex-

ceed a maximum diameter of 50 mm!

• Make sure that the permissible maximum speed of the

bits and cutters does not undershoot the speed of the

device! The tool can break when the maximum per-

missible speed is exceeded. Flying parts can cause

damage and severe injuries!

• Never work without dust protection mask and safety

glasses. Some dusts have a hazardous effect! Materi-

als containing asbestos may not be machined!

• Do not work with damaged tools!

• Ensure the work piece is fixed securely! Loose work

pieces should be clamped in a suitable fixture. This

prevents the work pieces from flying about.

• A correct and uniform speed achieves a high grinding

performance, not excessive contact pressure! Exces-

sive pressure is to be avoided: it only stresses the de-

vice and can even damage the bits and cutters!

• Hold the device without covering the ventilation slots.

If it overheats, you absolutely must shut off the device

and allow it to cool down.

• Do not use the cutting disc for rough-machining. Risk

of fracture!

• Work only with a correctly adjusted protective guard!

• When storing the bits and cutters, make sure they are

reliably protected from damage!

Hold the device by the insulated gripping surfaces, as

the grinding surface can hit its own connecting cable.

Damage to a “live” wire can stress metal parts and

cause an electric shock.

Replacing the Grinding Disc

Your LHW long-neck angle grinder is ready for opera-

tion on delivery.

Pre-assembled with a fan sander with grain 100 and 50

mm diameter, ideal for grinding and smoothing mal-

leable cast iron, grey cast iron, stainless steel, steel,

non-ferrous metal, wood and plastic.

The supplied high-grade corundum sanding disc is ideal

for roughing, grinding, sharpening and removing rust

from metal or non-ferrous metal, and the included

corundum-bound cutting disc is perfect for abrasive

cutting of steel, non-ferrous metal, plastic or wood.

We also have a great number of additional problem

solvers in our comprehensive range of accessories.

1. Press the locking button 1 (Fig. 2).

2. Turn the fastening screw 4 using an Allen key 5 un-

til the locking button engages.

3. Undo the fastening screw 4, remove the centring

disc 3 and the grinding disc 2.

4. Fit a new grinding disc.

5. Press the locking button 1 and tighten the fasten-

ing screw 4.

Adjust the protective guard.

IMPORTANT!

Disconnect the plug from the mains before the follow-

ing.

1. Release fastening screw 1 (Fig. 3) and turn the

protective guard to the desired position.

2. Retighten the fastening screw.

Using the unit

1. Switch the unit on via the switch 3 (Fig. 1).

NOTE!

Do not press too hard when using the grinder. Good

grinding performance can only be achieved using the

correct and constant rotational speed.

To achieve the best results when roughening, apply

the grinding disc to the grinding surface at an angle

of between 30° and 40° and move evenly back and

forth over the workpiece.

Do not bend the grinding disc into the cutting surface

during cutting work.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Proxxon LHW in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 4.13 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Proxxon LHW Manual

Product: