Manual Proxxon LHW (page 10 of 78) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Spanish)

782216

Zoom out

Zoom in

1/78

- 10 -

Translation of the

Original Operating Instructions

Long-neck angle grinder LHW

Dear customer!

Always keep these operating instructions and the en-

closed safety guidelines within reach.

Only use this device with exact knowledge of it and

comply with the instructions and safety guidelines!

This is necessary to ensure safe operation and, second-

ly, it simplifies familiarisation with the device and its

functions.

Proxxon assumes no liability for the safe function of the

device in the case of:

•

handling that does not comply with normal intended use,

• use for other purposes not mentioned in the manual,

• incorrectly executed repairs,

• ailure to heed safety instructions,

• external influences for which the manufacturer is not

responsible

We recommend using PROXXON original spare parts

for all repair and maintenance work.

Repairs should only be performed by qualified skilled

personnel!

Please note: All information contained in these operat-

ing instructions - especially the technical data - corre-

sponds to the status at the time of printing.

We reserve the right to make further developments in

the interest of technical progress. We wish you every

success with the device.

WARNING!

Read all safety warnings and instructions.

Failure to follow all safety warnings and in-

structions listed below may result in electric shock, fire

and/or serious injury.

KEEP ALL SAFETY WARNINGS AND INSTRUCTIONS

FOR THE FUTURE!

Safety guidelines for all operations

a) This power tool can be used as grinder, sander

and abrasive cutting-off tool. Please observe all

safety guidelines, instructions, illustrations and

data provided with the device. Failure to follow in-

structions listed below may result in electric shock,

fire and/or serious injuries.

b) This power tool is not suitable for working with

wire brushes and polishing Uses for which the

power tool is not intended can cause hazards and

injuries.

c) Do not use accessories which are not designed or

recommended by the manufacturer specifically

for this power tool. Just because the accessory can

be attached to your power tool does not assure safe

use.

d) The rated speed of the bits and cutters must be at

least equal to the maximum speed specified on

the power tool. Accessories that turn faster than

their rated speed can break and fly apart.

e) The outside diameter and thickness of the bits and

cutters must be within the capacity rating of your

power tool. Incorrectly sized bits and cutters can-

not be adequately guarded or controlled.

f) The arbour size of discs, flanges, grinding discs

or other accessories must properly fit the grinding

spindle of your power tool. Bits and cutters that do

not fit the grinding spindle of the power tool prop-

erly will turn unevenly, vibrate very strongly and

cause loss of control.

g) Do not use damaged bits and cutters. Before each

use, inspect bits and cutters such as sanding

discs for chips and cracks, grinding discs for

cracks, strong wear or tear, wire brushes for loose

or broken wires. If the power tool or bits and cut-

ters are dropped, check for damage or install un-

damaged bits and cutters. After you have inspect-

ed and installed the bits and cutters, keep your-

self and any other persons in the vicinity away

from the plane of the rotating bits and cutters and

run the device at maximum rotational speed for

one minute. Damaged bits and cutters usually

break during this test time.

h) Wear protective equipment. Depending on the ap-

plication, use full face protection, eye protection

or protective goggles. If appropriate, wear a dust

mask, hearing protection, protective gloves or a

special apron capable of stopping small abrasive

and material particles. The eyes are to be protect-

ed from flying debris generated during various op-

erations. Dust masks or respirators must filter the

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Proxxon LHW in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 4.13 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Proxxon LHW Manual

Product: