782212
5
Zoom out
Zoom in
Previous page
1/24
Next page
-5-
Note:
Only operate the GG 12 with the voltage supply unit provi-
ded or other PROXXON voltage supply units (NG 2/Eor
NG 5/E).
Technical data:
Permanently excited DC motor for 12 - 18 volt
Power rating:max. 25 watt
Nominalcurrent consumption: 0.5 A
Ball bearings
Radial fan for forced cooling
Idle speed: 20,000 rpm
Micro-switch (button) in handle
Housing made of glass-fibre-reinforced polyamide
Power lead (helix cable) with non-interchangeable plug,
approx. 100 cm long
Isolation transformer
For use in dry
environments only
Fuse
Protection class II device
Please do not dispose off
the machine!
Shielded conforming toEC-EMC Directive 89/336.
Noise emission 70 dB(A).
Note:
Only use inserting tools witha 2.35-mm shaft.Clamp shaft
with pliers and insert into the mount to the stop.
Never overload the tool by pressing too hard. Always
remember that power is provided by the rotational speed
and not the contact pressure.
Working with the tool:
Switch on the tool and hold like apen withagentle grip.
Rest the lower half of your arm on the table or against your
body.After some practice, we recommend that you work
with templates (available in shops). Simply adhere these to
the rear of the glass withadhesive tape. Always make the
outline first.Use the diamond abrasive pencils to do this.
Then create matt surfaces with the silicon-carbide pencils.
Always remember:
Practice makes perfect.At the beginning, use simple types
of glass (panes or cylindrical glass). Use dark materials
underneath to givea better contrast.
Careand maintenance
Except for occasionalcleaning,no special maintenance is
required for your engraving tool. If you follow the instructions
in this User Manual, the tool will reliably and safely provide
you with valuable services for many years.
EC declaration of conformity
Name and address of producer:
PROXXON S.A.
6-10, rebierg
L-6868Wecker
Description:Engraving tool GG 12 Set
Article No.:28635
Weassume sole liability for ensuring that this product
conforms with the following standards and normative
documents:
EC Machine Guideline 98/037/EEC
Applicable standards:DIN EN 60745-1 /12.2003
EC EMC Guideline 89/336/EEC
Applicable standards:DIN EN 55014-1 / 09.2002
DIN EN 55014-2 / 08.2002
DIN EN 61000-3-2 / 12.2001
DIN EN 61000-3-3 / 05.2002
EU Low Voltage 73/23/EEC
Directive9
3/68/EEC
Applicable standards:
DIN EN 61558-1 / 07.1998
DIN EN 61558-1 A1 / 11.1998
DIN EN 61558-1 A11 / 10.2003
DIN EN 61558-2-6 / 07.1998
Date:08.07.04
Dipl.-Ing. JörgWagner
PROXXON S.A.
Equipment Safety Division
Fig. 1
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Proxxon GG 12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Proxxon GG 12 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 1.39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info