782201
5
Zoom out
Zoom in
Previous page
1/19
Next page
Never work without the designated safety mechanisms.
Pay attention to environmental effects!
Use the machine only in dryenvironments and never in the vicin-
ity of combustible liquids or gases. Make sure you have good
lighting!
Wear protective goggles!
Wear hearing protection!
The sound pressure level when working with the machine can ex-
ceed 85 dB (A), therefore always work with hearing protection!
Wear suitable working clothes!
When working, never wear loose clothing, such as neckties or
scarves, as this could get caught in one of the moving parts or
the automatically moving workpiece during operation and cause
injuries. If you have long hair,wear ahairnet and remove your
jewellery.
Do not use any damaged or deformed cutting tools.
Please make absolutelysure the cutting tools are in perfect con-
dition. Visually check for this intactcondition before each use!
Keep children and non-participants away from the working
area.
Make sure that children and non-participantsmaintain an ap-
propriate safety distance! Youths below the age of 16 may only
use the machine under professional instruction and for purpos-
es of schooling. When not in use, keep the machine out of the
reach of children!
Do not overstress your tool.
Of course, you will only achieve optimal work results within the
performance range for which the machine is designed! There-
fore, avoid making the infeed too large! Do not misuse the ma-
chine, and do not use it for work for which it is not intended.
Always be prudent and attentive!
Observe the machine during work and proceed sensibly.Donot
use the machine if you are distracted, tired, or if you have con-
sumed alcohol.
Handle the connecting cable with care!
Protect the connecting cable from heat and sharp edges, and lay
the cable so that it cannot be damaged. Do not pull on the cable
to disconnect the plug from the socket outlet, and do not lift the
device by the cable. Ensure cleanliness: Protect the cable from
grease and oil!
Clean thoroughly after work!
Disconnect the mains plug!
Always unplug the mains plug when not in use, before mainte-
nance, when changing tools, cleaning or repairing! Removing
the chips is also apart of cleaning!
Carefully read the operating instructions before use and keep
them in asafe place!
Overview of machine
Legend (Fig. 1)
1. Headstock
2. Lathe chuck
3. Cutting tool holder
4. Travelling lathe centre
5. Quill
6. Clamping screw for quill
7. Tailstock
8. Handwheel for quill
9. Clamping lever for tailstock
10. Handwheel for upper carriage
11. Upper carriage
12. Cross slide
13. Handwheel for cross slide
14. Gearbox cover
15. On-off switch
16. Rotational speed regulating knob
17. Chuck guard
18. Spanners
19. Dowel pins
Description of the machine
The FD 150/E is acompact precision lathe with suitably practical
equipment: It offers across slide and an upper carriage, astur-
dy headstock with ahigh-quality rolling bearing for the work spin-
dle, astrong drive, and atailstock with travelling lathe centre.
Thesefeatures in conjunction with the high-strength and precise
aluminium continuous casting base make the FD 150/E the spe-
cialist for all filigree workpieces.
The high rotational speed also accommodates the typical field of
application:
The adjustable two-stage belt drive in combination with asen-
sitive control unit always ensures the suitable cutting speed even
for the most minute workpiece diameters.
Apart from the classical possibilities of turning, the swivelling
upper carriage also enables the manufacture of tapers or ta-
pered elements. The drill chuck, available as accessory, makes
frontal drilling of holes easy.
And for everyone with especially high requirements concerning
concentricity,wehave acollet set for this machine in our pro-
gramme: The necessaryER11 holding fixture is provided in the
main spindle. On the following pages we will introduce the ma-
chine and its possibilities in all details as well as the available ac-
cessories. The Proxxon team wishes you much happiness and
success when working with your machine!
Scope of delivery
1pc. FD 150/E Lathe
1pc. Operating instructions
1pc. Brochure with safety guidelines
1pc. Open-end spanner
2pc. Dowel pins
-16-
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Proxxon FD 150-E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Proxxon FD 150-E in the language / languages: English as an attachment in your email.

The manual is 1.46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info