Manual Proxxon BFW 40-E (page 6 of 30) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Spanish)

782253

Zoom out

Zoom in

1/30

Translation of the Original Operating

Instructions BFW 40/E

Dear Customer,

With the BFW 40/E you have purchased a machine

which is ideal for milling and drilling metal, plastic and

wood. This machine is equipped with:

- a high-quality, quiet running permanent magnet DC

motor with a high tractive force throughout the entire

speed range;

- high-performance voltage supply unit with low voltage

safety feature;

- stepless speed control for optimal adaptation of speed

to different materials and tools;

- continuous spindle for true-running precision

with 1/2" external thread for mounting collet chucks

or drill chuck;

- ø 43 mm spindle neck for mounting in drilling or

milling stands according to European standards;

- 6 steel collet chucks from 2.35 to 6 mm for optimal

true-running.

Key (Fig. 1):

1. Power cable for voltage supply unit

2. Voltage supply unit 230V/AC – 40 V/DC

3. Speed table

4. On/off switch for voltage supply unit

5. Speed control

6. Motor connecting lead for 40V/DC

7. On/off switch

8. Motor

9. ø 43mm mounting for drilling

or milling stands

10. Spindle with 1/2" thread for collet chucks

or drill chuck

11. A/F 17 spanner flats

12. Collet chuck

13. Union nut for collet chuck

14. Locking pin

Technical data:

Motor:

Voltage: 40 volts DC

Power rating: 250 watts - short-

time duty 10 mins.

Speed: 900 to 6000 rpm

Noise emission: ≤ 70dB(A)

Voltage supply unit:

Primary voltage: 220-240 volts, 50/60 Hz

Secondary voltage: 40 volts DC

Power rating: 250 watts -

short-time duty 10 mins.

Collet chucks: ø 2.35 mm, 3.0 mm,

3.2 mm, 4.0 mm,

5.0 mm, 6.0 mm.

For use in dry environments only

Protection class II device

Please do not dispose off the machine!

Operation:

Important

The motor must only be operated with the

accompanying safety voltage supply unit (40 volts DC).

There is a risk of injury if used with another voltage

supply unit.

Mounting on a drilling or milling stand:

Note

Safe and precise operation is only possible if the

machine is properly fastened in a stable drilling or

milling stand. The drilling or milling stand must be

securely fastened to a table top. For safe and precise

operation, we recommend the PROXXON BFB 2000

drilling and milling stand in conjunction with the KT 150

compound-type table.

Important

Disconnect the power cable or the motor connecting

lead before all operations on the machine.

1. Insert the machine in a secure drilling stand (Fig. 2)

and tighten the clamp.

2. Connect the voltage supply unit to the mains using

the power cable.

3. Ensure that the voltage supply unit is switched off.

4. Connect the machine to the voltage supply unit.

- 6 -

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Proxxon BFW 40-E in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 0.83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Proxxon BFW 40-E Manual

Product: