634701
53
Zoom out
Zoom in
Previous page
1/81
Next page
DVR User Manual
47
8 Remote Surveillance
8.1 IE Remote Surveillance by NAT
8.1.1 NAT Settings
The DVR shall be powered on and connected to the network.
Go to Main MenuSetupNetworkNetwork. You can obtain the IP address, Subnet
Mask and Gateway automatically. You can also manually input them according to the
actual network situation. And the IP address shall be in the same network segment as
the network which is used.
Set the preferred or alternative DNS Server (Please refer to 4.6.1 Network for details).
Go to Main MenuSetupNetworkNAT tab.
Enable NAT and input the NAT Server (The default NAT Server is www.provisionisr-nat.com).
Click Apply to save the parameters (Please refer to 4.6.5 NAT for details).
8.1.2 NAT Access
After finishing the NAT settings, you can enter the NAT Server on the PC (Input
http://www.provisionisr-cloud.com to go to the IE client). If you are the first time to access the
NAT, the network will download the ActiveX automatically.
Note: If you cannot download and install ActiveX, please refer to FAQ Q7.
After installing ActiveX successfully, it will pop up the login box:
Serial No: The MAC address of the DVR (Go to Main MenuInformationQRCODE to check
the number below the QR code).
User Name: The login username of DVR. The default username is admin.
Password: The login password of DVR. The default password is 123456.
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Provision ISR SA-8200SH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Provision ISR SA-8200SH in the language / languages: English as an attachment in your email.

The manual is 5,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info