634701
31
Zoom out
Zoom in
Previous page
1/81
Next page
DVR User Manual
25
and time (day or night), you can adjust its value according to the practical conditions. Left
click the grid and drag to delete area. Click icon to set the whole area as detection
area. Click icon to clear the set detection area. Click icon to test the sensitivity
as per the local conditions. Once motion is sensed, it displays a figure icon. Click
icon, to save the setting. Click icon to exit the current interface.
Note: Prior to setting motion detection field it is recommended that you click icon
to clear the existing field and set afresh.
Select “All” to set the same settings for all channels.
Click “Apply” button to save the setting.
Go to Schedule tab. The setting steps for schedule for motion based alarm are similar to
normal schedule setup (see Chapter 4.4.1 for more details).
5.5.2 Video Loss
This DVR can be set up to detect video loss. The setting steps are as follows:
Go to Main MenuSetupAlarm Video Loss. Refer to Fig 4-20.
The setup steps of video loss trigger are similar to motion trigger setting. (See Chapter
4.5.1 MotionTrigger setting for more details).
Fig 4-20 Alarm Configuration-Video Loss
5.5.3 Other Alarm
This tab gives a choice to configure alarm for Disk Full, IP Conflict, the Disconnect event, Disk
Attenuation or Disk Lost.
Go to Main MenuSetupAlarmOther Alarm. Refer to Fig 4-21.
Use the dropdown menu and select the event or the alarm.
Check the required trigger options.
If the selected event is “Disk Full”, then use the drop down box for “Disk Shortage Alarm”
to choose a threshold value for remaining HDD space. If the threshold value is reached,
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Provision ISR SA-8200SH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Provision ISR SA-8200SH in the language / languages: English as an attachment in your email.

The manual is 5,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info