Manual Provision ISR NVR3-16400-8P (page 26 of 74) (English)

634710

Zoom out

Zoom in

1/74

5.3.2 Record Bitrate

Step 1: Enter into MenuSetupRecord Record Bitrate. Refer to Fig 5-11:

Step 2: Set up rate, resolution, quality, encode and max bit stream.

Step 3: Select “All” to set the same settings for all channels.

Step 4: Click “Apply” button to save the setting.

Fig 5-11 Record Configuration-Record Bitrate

If the value of the parameter is set to exceed the maximum resources of the system, the system will

automatically adjust it.

5.3.3 Time

Step 1: Enter into MenuSetupRecord  Time interface to set recording time. Refer to Fig 5-12:

Step 2: Set Pre-alarm record time and post-alarm record time. Select “All” to set the same settings for all

channels.

Step 3: Click “Apply” to save the setting.

Fig 5-12 Record Configuration-Time

Parameter

Meaning

Rate

Range from: 1-30（NTSC）1-25(PAL)

Resolution

Supports1080P, 720P, VGA

Quality

The higher the value is, the clearer the recorded image is. Six options:

lowest, lower, low, medium, higher and highest.

Encode

VBR and CBR

Max bit stream

Range from: 256~12288kbps

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Provision ISR NVR3-16400-8P in the language / languages: English as an attachment in your email.

The manual is 4,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Provision ISR NVR3-16400-8P Manual

Product: