634695
47
Zoom out
Zoom in
Previous page
1/74
Next page
7.1.7 QRCODE
User can quickly access the mobile client by scanning QRCODE. Go to Main menu→Information→QRCODE
tab. In this interface, you can scan the QRCODE through the mobile phone. Refer to Fig 6-2:
Fig 6-2 Information Configuration-QRCODE
7.2 Manual Alarm
In this interface, user can trigger a manual alarm.
7.3 Disk Management
1. Format the disk
Step1: Enter into disk management tab.
Note: please format the hard disk before recording. If not formatted, it will show the status of the disk-free space, and total space at
the bottom of screen.
Step2: Click Refresh button to refresh the disk information in the list box.
Step3: Select a hard disk and click Format button to start format.
Note: All recorded files in the hard disk will be lost once it is formatted.
2. Advanced
User may check model, S/N, firmware, health status of the disk in this interface. User also can monitor the
temperature, internal circuit, dielectric material of the disk, analysis the potential problems of the disk and
warn so as to protect its data.
7.4 Upgrade
The NVR can be upgraded by using USB flash drive. Get the upgrading software from your vendor when
there is a new software version.
Upgrade Steps:
Step 1: Copy the upgrade software which gets from vendor into the USB storage device.
Step 2: Connect the USB flash drive to the USB port.
Step 3: Enter MenuUpgrade tab. Then the upgrade software name would be displayed in the upgrade
list box.
Step 4: Select that software and then click upgrade button. It will upgrade automatically.
Note: Please wait for a while when the system reboots. Never cut off power during upgrading. The original configuration will be
reserved after upgrade.
7.5 Logoff
Enter into Menu Logoff tab. A log off dialogue box will pop up. The device will log off by clicking “OK”
button. If you want to log in again, click Menu icon to enter into user name and password to re-login.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Provision ISR NVR2-4100P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Provision ISR NVR2-4100P in the language / languages: English as an attachment in your email.

The manual is 4,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info