634707
26
Zoom out
Zoom in
Previous page
1/73
Next page
5.3.2 Record Bitrate
Step 1: Enter into MenuSetupRecord Record Bitrate. Refer to Fig 5-11:
Step 2: Set up rate, resolution, quality, encode and max bit stream.
Step 3: Select “All” to set the same settings for all channels.
Step 4: Click “Apply” button to save the setting.
Fig 5-11 Record Configuration-Record Bitrate
If the value of the parameter is set to exceed the maximum resources of the system, the system will
automatically adjust it.
5.3.3 Time
Step 1: Enter into MenuSetupRecord Time interface to set recording time. Refer to Fig 5-12:
Step 2: Set Pre-alarm record time and post-alarm record time. Select “All” to set the same settings for all
channels.
Step 3: Click “Apply” to save the setting.
Fig 5-12 Record Configuration-Time
Parameter
Meaning
Rate
Range from: 1-30NTSC1-25(PAL)
Resolution
Supports1080P, 720P, VGA
Quality
The higher the value is, the clearer the recorded image is. Six options:
lowest, lower, low, medium, higher and highest.
Encode
VBR and CBR
Max bit stream
Range from: 256~12288kbps
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Provision ISR NVR-4100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Provision ISR NVR-4100 in the language / languages: English as an attachment in your email.

The manual is 4,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info