Manual Provision ISR NVR-16400 (page 34 of 73) (English)

634706

Zoom out

Zoom in

1/73

http://192.168.0.25, you should input the following IP address: http://192.168.0.25:82 into IE browser.

Step 3: Set server port. The default server port is 6036.

Step 4: Connect internet. There are three ways to connect internet.

 If you have a DHCP server running and would like your NVR to automatically obtain an IP address

and other network settings, check the checkbox beside "Obtain an IP address automatically". Then

the device will distribute IP address, subnet mask, and gateway IP and DNS server.

 If you want to configure your own settings, disable “Obtain an IP address automatically” item and

input the IP address, subnet mask, gateway IP and DNS server.

 If you connect internet through PPPoE, disable “Obtain an IP address automatically” item and check

PPPoE checkbox and then enter username and password. Once the setup is completed, your NVR

will automatically dial up into your network.

Step 5: Test the effectiveness of the network by clicking “Test” button after you set up the network.

Step 6: If the network is well connected, please click “Apply” button to save the setting.

5.6.2 Sub-stream

System configuration  network configuration  sub stream; refer to Fig 4-30

Select fps, resolution, quality, encode and max bit rate

To setup all channels with the same parameters choose “all” and then apply to save relevant setup to all

channels.

Reset to default setting; click the “default” button and then “apply” button to save the setting.

5.6.3 Email

To set up Email:

Step 1: Enter into MenuSetup NetworkEmail tab. Refer to Fig 5-24:

Fig 5-24 Network Configuration-Email

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Provision ISR NVR-16400 in the language / languages: English as an attachment in your email.

The manual is 4,65 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Provision ISR NVR-16400 Manual

Product: