634706
29
Zoom out
Zoom in
Previous page
1/73
Next page
5.4.2 Motion Schedule
This tab allows setting schedule for motion based recording. The setting steps are as follows:
Step 1: Enter into MenuSetupSchedule Motion tab.
Step 2: The setup steps for schedule for motion based recording are similar to normal schedule setup. You
can refer to 5.4.1 Schedule for details.
Note: The default schedule of motion based recording is 24
7. If you want to activate motion
based recording, you must enable motion alarm and set up schedule for motion alarm (see
Chapter 5.5.2 Motion Alarm for more details).
5.4.3 Sensor Schedule
This tab allows setting schedule for sensor based recording. The setting steps are as follows:
Step 1: Enter into MenuSetupScheduleSensor interface.
Step 2: The setup steps for schedule for sensor based recording are similar to normal schedule setup (see
Chapter 5.4.1 Schedule for details).
Note: The default schedule of sensor based recording is 24
7. If you want to activate sensor
based recording, you must enable sensor alarm and set up schedule for sensor alarm (see Chapter
5.5.1 Sensor Alarm for more details).
5.5 Alarm Configuration
Alarm configuration includes four sub menus: sensor, motion, other alarm and alarm out.
5.5.1 Sensor Alarm
Sensor includes three sub menus: basic, alarm handling and schedule.
Operate the following steps to configure sensor alarm:
Step 1: Enter into MenuSetupAlarm SensorBasic tab. Refer to Fig 5-16:
Fig 5-16 Alarm Configuration-Sensor-Sensor
Step 2: Enable channels by checking the checkboxes beside the desired channels.
Step 3: Set the alarm type according to triggered alarm type. Two option: NO and NC.
Step 4: Click “Apply” button to save the setting.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Provision ISR NVR-16400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Provision ISR NVR-16400 in the language / languages: English as an attachment in your email.

The manual is 4,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info