Manual Protool WCP50 (page 9 of 90) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

490687

Zoom out

Zoom in

1/90

Wall Chaser WCP 50 – original

instruction

Table of contents

1 Symbols .............................................. 9

2 Tool Speciﬁ cations ................................. 9

3 Application ........................................... 9

4 Controls .............................................. 9

5 Safety instructions ................................ 9

5.1 Safety precautions for work procedures

comprising abrasive cutting .................. 10

5.2 Further safety precautions for work

procedures comprising abrasive cutting ... 11

5.3 Emission levels ................................... 11

6 Tool clamping ..................................... 12

6.1 Installation of diamond discs ................ 12

6.2 Slotting with four discs ........................ 12

6.3 Uninstallation of diamond discs ............. 12

6.4 Adjusting the cutting depth .................. 12

7 Dust exhaust ...................................... 12

8 Commissioning ................................... 12

8.1 Smooth start-up ................................. 13

8.2 Limitation of start-up current ................ 13

8.3 Overload protection ............................. 13

8.4 Thermal overload protection ................. 13

9 Maintenance ....................................... 13

10 Environmental Protection / Disposal ........ 13

11 Warranty ........................................... 13

12 Declaration of Conformity .................... 14

1 Symbols

Double insulation

Warning of general danger

Risk of electric shock

Use protective goggles!

Wear ear protection!

Wear a dust mask!

Use protective gloves!

Read the instructions

Not to be included in municipal refuse

► Advice or tip

2 Tool Speciﬁ cations

Voltage 220 – 240 V

Frequency 50 – 60 Hz

Input power 2200 W

Idle speed 8000 min

–1

Weight 6.5 kg

of discs 150 mm

Depth of groove 10 – 50 mm

Width of groove

- with one disc 2.6 mm

- with two discs 7.5 – 46.5 mm

Width of spacer rings 3; 6; 12; 21 mm

Protection class II /

3 Application

This tool is intended exclusively for cutting grooves

and dividing of materials, especially concrete,

brickwork, tiles, etc., without the use of water. For

materials that produce dust or fumes hazardous to

health during processing, use an exhaust system in

line with regional safety regulations (see the Use

of higher class exhausters – M, H).

The user is responsible for any use not in compli-

ance with the intended use.

4 Controls

[1-1] Switch

[1-2] Release switch

[1-3] Regulator wheel

[1-4] Slide unblocking

[1-5] Rotation direction arrow

[1-6] Exhaust attachment

[1-7] Handle

[1-8] Slide

[1-9] Quick-clamp nut

[1-10] Shutter

[1-11] Diamond discs

[1-12] Spacer rings

Not all of the accessories illustrated or described

are included as standard delivery.

5 Safety instructions

WARNING!

Read all instructions. Failure to follow all instruc-

tions listed below may result in electric shock, ﬁ re

and/or serious injury. The term “power tool” in all

of the warnings listed below refers to your mains-

operated (corded) power tool or battery-operated

(cordless) power tool.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Protool WCP50 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,14 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Protool WCP50 Manual

Product: