490686

Protool WCP 32 Manual

9
Zoom out
Zoom in
Previous page
1/90
Next page
9
GB
Wall Chaser WCP 32 – original
instruction
Table of contents
1 Symbols .............................................. 9
2 Tool Specifi cations ................................. 9
3 Application ........................................... 9
4 Controls .............................................. 9
5 Safety instructions ................................ 9
5.1 Safety precautions for work procedures
comprising abrasive cutting .................. 10
5.2 Further safety precautions for work
procedures comprising abrasive cutting ... 11
5.3 Emission levels ................................... 11
6 Tool clamping ..................................... 12
6.1 Installation of diamond discs ................ 12
6.2 Slotting with four discs ........................ 12
6.3 Uninstallation of diamond discs ............. 12
6.4 Adjusting the cutting depth .................. 12
7 Dust exhaust ...................................... 12
8 Commissioning ................................... 12
8.1 Smooth start-up ................................. 13
8.2 Overload protection ............................. 13
8.3 Thermal overload protection ................. 13
9 Maintenance ....................................... 13
10 Environmental Protection / Disposal ........ 13
11 Warranty ........................................... 13
12 Declaration of Conformity .................... 14
1 Symbols
Double insulation
Warning of general danger
Risk of electric shock
Use protective goggles!
Wear ear protection!
Wear a dust mask!
Use protective gloves!
Read the instructions
Not to be included in municipal refuse
► Advice or tip
2 Tool Specifi cations
Voltage 220 – 240 V
Frequency 50 – 60 Hz
Input power 1600 W
Idle speed 7200 min
–1
Weight 4.9 kg
of discs 125 mm
Depth of groove 0 – 32 mm
Width of groove
- with one disc 2.6 mm
- with two discs 7 – 35 mm
Width of spacer rings 2.5; 5; 10; 15 mm
Protection class II /
3 Application
This tool is intended exclusively for cutting grooves
and dividing of materials, especially concrete,
brickwork, tiles, etc., without the use of water. For
materials that produce dust or fumes hazardous to
health during processing, use an exhaust system in
line with regional safety regulations (see the Use
of higher class exhausters – M, H).
The user is responsible for any use not in compli-
ance with the intended use.
4 Controls
[1-1] Switch
[1-2] Switch unblocking
[1-3] Cutting depth regulating wheel
[1-4] Slide unblocking button
[1-5] Rotation direction arrow
[1-6] Exhaust attachment
[1-7] Auxiliary handle unblocking
[1-8] Auxiliary handle
[1-9] Load indication light
[1-10] Quick-clamp nut
[1-11] Shutter
[1-12] Spacer rings
[1-13] Diamond discs
Not all of the accessories illustrated or described
are included as standard delivery.
5 Safety instructions
WARNING!
Read all instructions. Failure to follow all instruc-
tions listed below may result in electric shock, fi re
and/or serious injury. The term “power tool” in all
of the warnings listed below refers to your mains-
operated (corded) power tool or battery-operated
(cordless) power tool.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Protool WCP 32 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Protool WCP 32 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info