Manual Protool VCP 480E-L (page 21 of 132) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish)

490620

Zoom out

Zoom in

1/132

9.1 Changing the ﬁ lter element

NOTE

Motor damage

Never operate the extractor without a ﬁ l-

ter element ﬁ tted as the motor may be-

come damaged.

Open the locking clips [2-2] and remove the

top section of the machine [2-1].

Turn the top section of the machine so that

the main ﬁ lter is facing upwards (Fig. [7]).

Fold over the lever [7-3] and remove the

retainer [7-2].

Remove the used main ﬁ lter and replace

[7-1] with a new one.

Dispose of the used ﬁ lter in accordance with

statutory regulations.

Remove any dust which has fallen behind

the main ﬁ lter when it is replaced.

Insert the retainer [7-2] and fold over the

lever [7-3] until it engages.

Replace the top section [2-1] and close the

locking clips [1-11].

9.2 Emptying the dust container

The dust container [2-3] can be emptied

once the top section has been removed.

► After extracting ﬂ uids, clean the ﬁ ll level

sensors [9-1] regularly with a soft cloth

and inspect for damage.

10 Accessories

Use only original PROTOOL accessories and

PROTOOL consumable material intended for

this machine because these components

are designed speciﬁ cally for the machine.

Using accessories and consumable mate-

rial from other suppliers will most likely af-

fect the quality of your working results and

limit any warranty claims. Machine wear or

your own personal workload may increase

depending on the application. Protect your-

self and your machine, and preserve your

warranty claims by always using original

PROTOOL accessories and PROTOOL con-

sumable material!

The order numbers for the accessories and

ﬁ lters can be found in the PROTOOL catalogue

or on the Internet at “www.protool.com”.

10.1 Module slot

To extend the vacuum cleaner, there are the

following module in the accessory range,

that can be ﬁ tted to the module slot [1-2]

by an authorised customer service work-

shop:

- Socket module with permanent power

supply.

10.2 Systainer depot

The surface of the vacuum cleaner is used

as a systainer parking zone:

The systainer can be hooked easily into the

systainer holder – see ﬁ gure [10 a].

If you wish to ﬁ rmly attach the systainer to

the vacuum cleaner, you must use 4 screws

to fasten a systainer adapter to the upper

section – see ﬁ gure [10 b].

11 Environmental

Protection / Disposal

Power tools, accessories and packaging

should be sorted for environmental-friendly

recycling.

Only for EC countries:

Do not dispose of power tools into

household waste!

According to the European Directive

2002/96/EC on waste electrical and elec-

tronic equipment and its incorporation into

national law, power tools that are no longer

suitable for use must be separately collect-

ed and sent for recovery in an environmen-

tal-friendly manner.

REACh

REACh is a European Chemical Directive

that came into effect in 2007. As “down-

stream users” and product manufacturers,

we are aware of our duty to provide our

customers with information. We have set up

the following website to keep you updated

with all the latest news and provide you

with information on all the materials used

in our existing products:

http://www.tts-protool.com/reach

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Protool VCP 480E-L in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 10,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Protool VCP 480E-L Manual

Product: