490679
13
Zoom out
Zoom in
Previous page
1/132
Next page
13
GB
Reinstating grinder
RGP 130-16 E
Table of contents
1 Symbols ................................... 13
2 Technical data ........................... 13
3 Prescribed usage ........................ 13
4 Control Elements ....................... 14
5 Notes on Safety Prevention ......... 14
5.1 General Safety Instructions ......... 14
5.2 Safety instructions for all
working activities ....................... 14
5.3 Additional safety instructions
for all types of works .................. 15
5.4 Supplementary safety instructions
for grinding and cutting .............. 16
5.5 Additional safety instructions
for surface grinding .................... 16
5.6 Additional safety instructions
for grinding with wire brush ......... 16
5.7 Turner safety instructions ............ 16
5.8 Noise / Vibration Information ........ 17
6 Activation ................................. 17
6.1 Switching on – off ....................... 17
6.2 Regulation electronics ................. 17
7 Operation ................................. 18
7.1 Fastening the grinding wheel ....... 18
7.2 Positioning the handle................. 18
7.3 Dust suction .............................. 18
7.4 Lifting the front brush ................. 18
7.5 Brush replacement ..................... 18
7.6 Grinding wheel .......................... 18
8 Maintenance .............................. 18
9 Environmental Protection /
Disposal.................................... 19
10 Warranty .................................. 19
11 Declaration of Conformity ............ 19
12 The table with recommended
types of grinding wheels ............. 20
1 Symbols
Double insulation
Warning of general danger
Risk of electric shock
Use protective goggles!
Wear ear protection!
Use protective gloves!
Read the instructions
Not to be included in municipal refuse
Advice or tip
2 Technical data
Nominal voltage 230 V ~
Mains frequency 50 / 60 Hz
Power input 1600 W
Adjustable rpm 3000 – 7700 min
–1
Tool 130 mm
Weight 3.8 kg
Protection class II /
3 Prescribed usage
The machine is designed for straighten-
ing concrete surfaces, smooth transfers
on boarding, removing plaster, paint, glue
residues, coating, corrosion, and for clean-
ing concrete and wooden surfaces.
The machine is constructed for use with
special wheels recommended by the manu-
facturer and they must not be used with a
wheel made from connected abrasive ma-
terial.
The machine can only be used for dry grind-
ing using an ef cient suction device.
Noncompliant use of the machine is a sole
responsibility of the user.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Protool RGP130 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Protool RGP130 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info