Manual Protool PDP 20-2 EAQ (page 12 of 92) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish)

78916

Zoom out

Zoom in

1/92

Notes on Safety

Thismachinecanonlybeoperated

safelywhentheoperating

instructionsandthepamphlet

containingthesafetyinstructions

havebeencompletelyreadand

strictlyadheredto.

 Forfurthernotesonsafetyrefertoenclosed

Sheet.

 Alwaysinspectcableandplugbeforeusing

machine.Onlyhavedamagerepairedbya

qualiedprofessional.

 Makesuremachineisswitchedoffbefore

insertingpluginsocket.

 Themachinemustnotbedampandmustnot

beoperatedinawetenvironment.

 Cautionwithlonghair.Donotwearloose-

ttingclothingwhileworking.

 Secureyourworkpiecewithclamps.

 Alwaysdirectpowercabletorearawayfrom

themachine.

 Whenscrewdriving,alwaysoperateinrst

gearandwithlowrpms.

 Usecautionwhenscrewdrivinglongscrews.

Dangerofinjuryduetoslippingoff.

 Alwaysensurethatyouhaveasecurefooting

whileworking.

 Alwaysusetheauxiliaryhandle(12)if

possible.

 Watchoutfortheinitialtorquereactionofthe

drill,especiallywhendrillbitistight.

 Beforecarryingoutanyworkonthemachine

disconnectfrompowersupplybyremoving

plugfromsocket.

 Thechuckkeyshouldalwaysbekeptinthe

holderprovidedonthecablesleeve.

 When drilling with the impact activated use

hearing protection.Exposuretotheeffects

ofnoisemaycausehearingloss.

 Use the additional handle (additional

handles) if it is (they are) supplied with the

tool.Lossofcontrolmaycauseinjurepeople.

 When carrying out an activity where the

machining tool could touch hidden power

conductors or its own power cord, hold

the electromechanical tool by the insulated

surfaces.Touchingthemachiningtoolwith

a"live"electricalconductormaycausethe

exposedmetalpartsoftheelectromechanical

tooltobecome“live”andleadtoinjuryofthe

userbyelectricshock.

Intended Use

Themachineisintendedforimpactdrillingin

brick,concreteandstoneaswellasfordrilling

inwood,metal,ceramicsandplastics.Machines

withelectroniccontrolandright/leftrotationare

alsosuitableforscrewingandthread-cutting.

Theuseraloneisresponsibleforanyliabilities

causedbyusageotherthanintended.

Starting and Operation

Incorrectoperationcanleadtodamageofthe

unit.Thereforealwaysobservethefollowing

recommendations:

- Sharpdrillbitsoptimizeperformancewhilst

minimizingwearonthemachine.

- Donotplacesuchloadsonthemachinethat

itceasestoturn.

- Changerotationaldirectiononlywhenthe

machineisnotmoving.

Ensurethatthevoltageofthepowersupply

matchestheinformationonthetypeplateofthe

powertool.Toolswitharatingof230Vcanalso

beconnectedtoa220V/240Vsupply.

Connecting the mains cable module

(Plug it)

Themachineisequippedwithaquick-change

mainscablemodule(7).Bydisconnecting

themainscableandthemachine,bothcan

betransportedeasier.Insertthemainscable

module(7)intothesocket(14)ofthemachine

andsecurebyturningthesleeve(15)in

clockwisedirection.

Toundotheconnection,turnthesleeve(15)in

counterclockwisedirectionandpullthemains

cablemodule(7)fromthesocket(14).

Usethemainscablemoduleonlyfor

PROTOOLpowertools.Donotattemptto

operateothermachineswithit.

Auxiliary handle

Theenclosedauxiliaryhandle(12)mountson

thecollar(3).Itshouldalwaysbeusedtoensure

operatingsafety.Thedrillingdepthcanbeset

withthedepthstop(13).

Thepositionoftheauxiliaryhandleandthe

depthstopcanbechangedbyturningthe

handle.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Protool PDP 20-2 EAQ in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Protool PDP 20-2 EAQ Manual

Product: