490611
13
Zoom out
Zoom in
Previous page
1/108
Next page
13
Table of contents
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
4.2 Machine-related safety
instructions
- Wear ear protection when impact drilling.
Exposure to noise can result in loss of hearing.
- Use auxiliary handle(s), if supplied with
the tool. Loss of control can cause personal
injury.
- Hold power tool by insulated gripping
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring or its own cord. Cutting ac-
cessory contacting a “”live”” wire may make
exposed metal parts of the power tool “”live””
and could give the operator an electric shock.
- The charger and power tool are not in-
tended for use by persons (including
children) with limited physical, senso-
ry or mental ability or without suf cient
experience and/or knowledge, unless they
are supervised by a person responsible for
their safety or have been instructed on how
the charger or power tool is to be used.
Children should always be supervised to ensure
that they do not play with the charger or the
power tools.
- Take care when drilling into walls as there is a
danger of rupturing concealed gas/water pipes
or cutting through power cables.
- Do not open the battery pack or the charger.
Even after disconnection from the mains, there is
still a high capacitor voltage inside the charger.
- Make sure that metal objects (such as metal
chips) do not collect in the battery pack retain-
ing slots or enter the machine through the air
vent slits (danger of short circuit).
- Protect the battery pack from excessive heat or
constant heat sources such as sunlight or naked
ames. There is a risk of explosion.
- Never use water to extinguish burning LiIon bat-
tery packs, always use sand.
4.3 Emission levels
Levels determined in accordance with EN 60 745
are typically:
Drilling
Sound pressure level L
PA
= 73 dB (A)
Noise level L
WA
= 84 dB (A)
Uncertainty K = 3 dB
Impact drilling
Sound pressure level L
PA
= 104 dB (A)
Noise level L
WA
= 115 dB (A)
Uncertainty K = 3 dB
2 Machine features
[1-1] Bit holder
[1-2] ON/OFF switch
[1-3] Right/left switch
[1-4] Drilling/Impact drilling switch
[1-5] Gear switch
[1-6] Torque thumbwheel
[1-7] Clamp for attaching to the belt
[1-8] Lighting button
[1-9] LED light
[2-1] Buttons for releasing the battery
[3-1] LED
[3-2] Battery pack
Not all of the accessories illustrated or described
are included as standard delivery.
3 Intended use
Cordless impact drills are suitable for drilling into
metal, wood, plastics and similar materials as well
as impact drilling into walls, concrete and similar
materials and inserting and tightening screws.
The BC 3 charger is designed for charging the bat-
tery packs listed.
The user is responsible for any damages and in-
juries caused by use which does not conform to
the intended purpose; including any damages and
wear caused by permanent industrial operation.
4 Safety instructions
4.1 General safety instructions
WARNING! Read all safety warnings and
all instructions. Failure to follow the warn-
ings and instructions may result in electric
shock, re and/or serious injury.
1 Symbols 12
2 Machine features 13
3 Intended use 13
4 Safety instructions 13
5 Commissioning 14
6 Machine settings 14
7 Tool holder, attachments 15
8 Operation 16
9 Service and maintenance 16
10 Transport 17
11 Accessories 17
12 Disposal 17
13 Warranty 17
14 EU Declaration of Conformity 18
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Protool PDC 18-4 TEC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Protool PDC 18-4 TEC in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info