490612
11
Zoom out
Zoom in
Previous page
1/87
Next page
PDC 18-4 Compact
11
GB
– Protect the machine from moisture.
Protect the cable from heat, oil and sharp
edges.
Check the plug and the cable regularly and
should either become damaged, have
them replaced by an authorised after-sales
service workshop.
5.3 Emission levels
Levels determined in accordance with EN
60745 are typically:
Vibration emission value a
h
(vector sum for
three directions) and uncertainty K mea-
sured in accordance with EN 60745:
The specified emissions values (vibration,
noise)
– are used to compare machines.
– They are also used for making preliminary
estimates regarding vibration and noise
loads during operation.
– They represent the primary applications of
the power tool.
Increase possible for other applications, with
other insertion tools or if not maintained ad-
equately. Take note of idling and downtimes
of machine!
6Operation
6.1 Charger cable holder[3-3]
Unwind the cable completely from the
recess before using the charger.
6.2 Changing the battery pack
Removing the battery pack[2 B]
Inserting the battery pack [2 A]
6.3 Charging the battery pack [3]
L
The battery pack is delivered partially
charged. Charge the battery pack com-
pletely before using for the first time.
The LED
[3-2]
on the charger indicates the
respective operating status of the charger.
6.4 Light and battery capacity indi-
cator
The LED on the lamp
[1-3]
is both a
light and a battery capacity indicator
[1-2]
.
The LED automatically indicates the charging
state of the battery pack (not NiCd and NiMH
battery packs) when the on/off switch
[1-8]
is pressed.
Drilling
Sound pressure level L
PA
= 69 dB(A)
Noise level L
WA
= 78 dB(A)
Uncertainty K = 3 dB
Impact drilling
Sound pressure level L
PA
= 99 dB(A)
Noise level L
WA
= 108 dB(A)
Uncertainty K = 3 dB
CAUTION
When working with noise
Damage to hearing
X
Always use ear protection.
Drilling into metal a
h
< 2,5 m/s
2
K = 1,5 m/s
2
Fastening a
h
< 2,5 m/s
2
K = 1,5 m/s
2
Impact drilling into
concrete
a
h
= 16,8 m/s
2
K = 3,0 m/s
2
LED yellow - lit continu-
ously
Charger is ready to use.
LED green - flashing
quickly
Battery pack is charged to
maximum capacity.
LED green - flashing
slowly
Battery pack is charged with
reduced current. LiIon is
charged to 80 %.
LED green - lit continu-
ously
Charging is complete or is not
restarted as current charge
status is greater than 80%.
LED red - flashing
General fault display, e.g.
incomplete contact, short cir-
cuit, defective battery pack,
etc.
LED red - lit continuously
Battery temperature is out-
side the permitted range.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Protool PDC 18-4 Compact at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Protool PDC 18-4 Compact in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 18,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info