490708
14
Zoom out
Zoom in
Previous page
1/100
Next page
14
For 400 V:
If efficiency of the rundown brake decreases and the
rundown time of cutting tool after switching off is
prolonged, the brake must be readjusted. However,
this adjustment must be carried out by an authorized
service workshop only.
Storage
Packed electric tools may be stored in dry unheated
storerooms with temperatures not dropping below – 5 °C.
Unpacked electric tools shall be stored only in dry
self-contained storerooms with temperatures not dropping
below + 5 °C, where sudden temperature changes are
prevented.
Recycling
After their service life is ended, submit the electric tool,
its accessories and packages to a disposal premise to allow
reusing of the raw materials.
To allow material-sorted recycling, all plastic components
are marked with relevant symbols.
Repairs and servicing
Repairs in the warranty and post-warranty periods are carri-
ed out by the servicing workshops listed in the index of
addresses.
Guarantee
We guarantee appliances in accordance with statutory /
country-specific regulations (proof of purchase by invoice
or delivery note). Damage attributable to normal wear and
tear, overload or improper handling will be excluded from
the guarantee. In case of complaint please send the
maschine, undismantled, to your dealer or the Service
Centre for electric power tools.
Noise/vibration information
Noise and vibration levels measured and determined
according to EN 50144.
For 230 V:
The typical A-weighted noise levels of the electric tool are:
Sound pressure level: 96 dB(A);
Sound power level: 109 dB(A).
Use ear protection!
The typical level of hand-arm vibration is 2,7 m/s
2
.
For 400 V:
The typical A-weighted noise levels of the electric tool are:
Sound pressure level: 86 dB(A);
Sound power level : 99 dB(A).
Use ear protection!
The typical level of hand-arm vibration is less
than 2,5 m/s
2
.
Product conformity declaration
We declare with our full responsibility that this product
complies with the requirements of the following standards:
EN 50144-1, EN 55014-1, EN 55014-2, EN 61000-3-2,
EN 61000-3-3 according to the provisions of the directives
89/336/EEC, 98/37/EC.
Manfred Kirchner
GB
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Protool NRP 90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Protool NRP 90 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info