490692
10
Zoom out
Zoom in
Previous page
1/88
Next page
10
Original instruction GB
1 Technical Speci cations
Stirrer MXP 1000 E EF MXP 1002 E EF MXP 1200 E EF
Voltage 220 – 240 V 220 – 240 V 220 – 240 V
Frequency 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz
Connected load 1020 W 1020 W 1200 W
Idling speed
1st speed 360 – 630 rpm 360 – 630 rpm 360 – 630 rpm
2nd speed 580 1010 rpm
Electronic speed preselection
Temperature-dependent
overload protection
– •
2-speed switch
Tool adapter M14x2/ErgoFix M14x2/ErgoFix M14x2/ErgoFix
Stirrer –
max 120 mm 120 mm 140 mm
Collar – 57 mm 57 mm 57 mm
Weight 4.5 kg 4.9 kg 4.5 kg
Protection rating II / II / II /
Table of contents
1 Technical Speci cations........................ 10
2 Symbols ............................................ 10
3 Operating equipment ........................... 10
4 Intended use ...................................... 10
5 Safety instructions .............................. 11
5.1 General safety instructions ................... 11
5.2 Safety warnings .................................. 11
5.3 Other safety risks ............................... 11
5.4 Information about noise and vibrations ... 11
6 Starting up and using the machine ........ 12
6.1 Tightening the stirrer ........................... 12
6.2 Switching the machine on and off .......... 12
6.3 Control electronics .............................. 12
6.4 Speed selection switch ......................... 12
6.5 ErgoFix interface ................................. 12
6.6 Stirrer ............................................... 13
6.7 Mains connection ................................ 13
6.8 Stationary use .................................... 14
6.9 Suction .............................................. 14
7 Service and maintenance ..................... 14
8 Service .............................................. 14
9 Environmental Protection / Disposal ........ 14
10 Warranty ........................................... 15
11 Declaration of Conformity .................... 15
2 Symbols
Double insulation
Warning of general danger
Risk of electric shock
Wear ear protection!
Read the instructions
Not to be included in municipal refuse
Advice or tip
3 Operating equipment
[1-1] Right handle
[1-2] Left handle
[1-3] Switch with switch protection
[1-4] Locking button
[1-5] Speed control
[1-6] Collar
[1-7] Casing
[1-8] ErgoFix adapter
[1-9] Speed selection switch (MXP 1002 E EF)
[1-10] Ventilation opening
Accessories that are illustrated or described here
are not always included in the scope of delivery.
4 Intended use
The device is designed for mixing powdered mate-
rials, such as mortar, plaster, adhesives and non-
solvent paints, varnishes and similar substances.
The manufacturer accepts no liability for possible
damage or accidents caused by using or operating
the device inappropriately or incorrectly.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Protool MXP 1002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Protool MXP 1002 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 12,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info