490608
15
Zoom out
Zoom in
Previous page
1/110
Next page
15
Vibration emission value a
h
(vector sum for
three directions) and uncertainty K mea-
sured in accordance with EN 60745:
The emission values specified (vibration,
noise) were measured in accordance with the
test conditions stipulated in EN 60745 and
are intended for machine comparisons. They
are also used for making preliminary esti-
mates regarding vibration and noise loads
during operation.
The emission values specified refer to the
main applications for which the power tool is
used. If the electric power tool is used for
other applications, with other tools or is not
maintained sufficiently prior to operation,
however, the vibration and noise load may be
higher when the tool is used. Take into ac-
count any machine idling times and down-
times to estimate these values more accu-
rately for a specified time period. This may
significantly reduce the load during the ma-
chine operating period.
5.4 Metalworking
The following precautions are to be
taken when processing metals for
safety reasons:
Pre-connect a residual current circuit-
breaker (FI, PRCD).
Connect the machine to a suitable dust ex-
tractor.
Clean tool regularly of dust accumulations
in the motor housing.
JSP 120, JSP 120 E
The power tool has a slide switch [1-1] to
switch the tool on and off (I = ON, 0 = OFF).
BSP 120 E
The power tool have a push button switch [2-
2] to switch the tool on and off.
The locking button [2-1] can be engaged to
operate in continuous mode. Press the switch
again to release the knob.
7.1 Changing tools
Open chuck lever [3-4] up to the stop.
Remove fitted saw blade.
Sound-power level L
WA
= 94 dB(A)
Measuring uncertainty
allowance
K = 3 dB
CAUTION
Operating noise
Damage to hearing
X
Wear ear protection!
Sawing wood
Handle (JSP 120, JSP 120 E,
BSP 120 E)
a
h
= 4,5 m/s
2
K = 2,0 m/s
2
Gear head (JSP 120, JSP
120 E)
a
h
= 7,0 m/s
2
K = 2,0 m/s
2
Sawing metal
Handle (JSP 120, JSP 120 E,
BSP 120 E)
a
h
= 3,0 m/s
2
K = 2,0 m/s
2
Gear head (JSP 120, JSP
120 E)
a
h
= 5,0 m/s
2
K = 2,0 m/s
2
BSP 120 E, JSP 120 E
Wear protective goggles.
6Operation
WARNING
Unauthorised voltage or frequency!
Risk of accident
X
The mains voltage and the frequency of
the power source must correspond with
the specifications on the machine's name
plate.
WARNING
Risk of injury, electric shock
X
Always pull the plug out of the socket be-
fore performing any type of work on the
machine!
7 Settings
WARNING
Risk of injury, electric shock
X
Always pull the plug out of the socket be-
fore performing any type of work on the
machine!
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Protool JSP 120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Protool JSP 120 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info