490603
12
Zoom out
Zoom in
Previous page
1/83
Next page
12
DRC 18-4 Compact
GB
7Settings
7.1 Changing direction of rotation
[1-7]
Switch to the left = clockwise rotation
Switch to the right = counterclockwise ro-
tation
7.2 Changing gear
You can change gear using the gear switch
[1-5]
.
7.3 Adjusting the torque[1-6]
Fastening
Select the correct torque setting:
Position 1 = low torque
Position 12 = high torque
An
acoustic signal
sounds when the preset
torque is reached and the machine then
switches off. You must release and press the
ON/OFF switch
[1-4]
again to start the ma-
chine.
Drilling
Mark is aligned with drill symbol = maxi-
mum torque.
7.4 Changing tools
Turn the clamping sleeve
[5-1]
anticlock-
wise to open the jaws. The arrow on the
clamping sleeve indicates the opening direc-
tion. The tool can now be inserted into the
drill chuck.
Turn the clamping sleeve
[5-1]
clockwise to
clamp the tool securely
8 Working with the machine
8.1 On/Off switch [1-4]
Press = ON, release = OFF
L
The speed of the machine depends on
how far the on/off switch is pressed in.
8.2 Bit depot [1-1]
Magnetic, for storing bits and bit holders.
8.3 Belt clip [1-8]
The user can attach the machine to work
clothing for short periods using the belt clip
(right/left).
8.4 Acoustic warning signals
Acoustic warning signals sound and the ma-
chine switches off in the following operating
states:
9 Service and maintenance
Note the following information:
Keep the ventilation slits on the machine
free and clean to ensure adequate cooling.
Keep the contacts on the machine, charger
and battery pack clean.
Information on battery packs
– Store in a cool, dry place at a temperature
between 5 °C and 25 °C.
Protect battery packs from moisture, water
and heat.
Do not leave flat battery packs in a charger
disconnected from the mains power supply
for longer than one month. Danger of deep
discharge!
If you intend to store li-ion battery packs
for longer periods without use, you should
charge them to 40 % capacity (approx. 15
min charging time).
9.1 After-sales service and repair
Always contact the manufacturer
or an authorised service work-
shop.
Visit www.protool-online.com/
service to locate your nearest
service point
Always use original Protool spare
parts!
LED red – flashing:
indi-
cates a general fault, e.g.
incomplete contact, short
circuit, battery pack faulty,
etc.
WARNING
Risk of injury
X
Always switch off the machine before ad-
justing settings!
CAUTION
Risk of injury
X
Clamp the tool centrally in the drill chuck!
– Preset torque reached.
"Block protect" - starting torque too
high.
– Machine overloaded
peep
EKAT
1
2
3
5
4
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Protool DRC 18-4 Compact at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Protool DRC 18-4 Compact in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 18,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info