Manual Protool CSP85-45 (page 14 of 134) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

490702

Zoom out

Zoom in

1/134

[2-12] Screw for length cut setting for

45° cutting angle

[3-1] Spindle locking button

[3-2] Cutting depth indicator

[3-3] Cutting depth scale

[3-4] Connecting socket

[3-5] Suction hose

[3-6] Chip deﬂ ector

[3-7] Backstop angle scale

[3-8] Cutting angle indicator

[3-9] Clamping lever for cutting depth

setting

[3-10] Allen key

[3-11] Adjusting nob

[3-12] Bolt for square cut setting (0°)

[4-1] Burr protector

[4-2] Clamp

Not all of the accessories illustrated or de-

scribed are included as standard delivery.

4 Intended Use

The machine is intended for lengthways and

crossways cutting of wood with straight cut-

ting lines as well as mitre angles to 45°

while resting ﬁ rmly on the work piece. With

suitable saw blades, non-ferrous metal,

light building materials and plastic can also

be sawed.

The user alone is responsible for any liabili-

ties caused by usage other than intended.

Persons under 16 are not permitted to use

the appliance.

5 Notes on Safety

Prevention

DANGER

5.1 General Safety Instructions

- Before using the machine, carefully read

all safety instructions and the Operating

Instructions.

- Keep all of the attached documents and

pass on the documentation if the ma-

chine changes ownership.

5.2 Safety Rules for Circular

Saws

a) Keep hands away from the cutting

area and the saw blade. Keep your

second hand on the auxiliary handle

or the motor housing. If both hands

are holding the circular saw, they can not

be cut by the saw blade.

b) Do not reach underneath the work.

The blade guard can not protect you from

the saw blade below the work.

c) Adjust the depth-of-cut to the thick-

ness of the work. It should not be vis-

ible below the work by more than the

height of a full tooth.

d) Never hold the workpiece being cut

in your hand or across your leg. Se-

cure the work on a ﬁ rm support. It is

important to secure the work properly to

minimize the danger of body exposure,

blade binding or loss of control.

e) Hold the power tool only by the in-

sulated gripping surfaces when per-

forming an operation where the cut-

ting tool may run into hidden wiring

or its own cord. Contact with a “live”

wire will also make exposed metal parts

of the tool “live” and shock the operator.

f) Always use a ripping guide or straight

edge guide for length cuts. This im-

proves the precision of the cut and re-

duces the possibility of blade binding.

g) Always use saw blades with the cor-

rect size and the matching arbour

shape (diamond or round). Blades

that do not match the mounting hard-

ware of the saw will run eccentrically,

causing loss of control.

h) Never use damaged or incorrect blade

washers or screws. The blade washers

and screws were specially designed for

your saw for optimum performance and

safety of operation.

5.3 Additional Safety Rules

for all Circular Saws

Cause and operator prevention of kick-

back:

- Kickback is a sudden reaction to a pinched,

bound or misaligned saw blade, causing

an uncontrolled saw to lift up and out of

the workpiece toward the operator;

- When the blade is pinched or bound tight-

ly by the kerf closing down, the blade

stalls and the motor reaction drives the

unit rapidly back toward the operator;

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Protool CSP85-45 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Protool CSP85-45 Manual

Product: