110272
14
Zoom out
Zoom in
Previous page
1/136
Next page
14
GB
Hand Circular Saw CSP 56-2 EB
– original instruction
Table of contents
1 Symbols ................................... 14
2 Tool Speci cations ...................... 14
3 Operating Controls ..................... 14
4 Intended Use ............................. 15
5 Notes on Safety Prevention ......... 15
5.1 General Safety Instructions ......... 15
5.2 Safety Rules for Circular Saws ..... 15
5.3 Additional Safety Rules
for all Circular Saws ................... 15
5.4 Speci c Safety Rules
for CSP 56-2 EB Circular Saws ..... 16
5.5 Emission levels .......................... 17
6 Commissioning and Operation ...... 17
7 Adjustment ............................... 17
7.1 Electronic Motor Control .............. 17
7.2 Cutting Depth Adjustment ........... 18
7.3 Cutting Angle Adjustment ........... 18
7.4 Cutting Edge Indicator ................ 18
7.5 Parallel Guide ............................ 18
7.6 Exhaustion ................................ 18
7.7 Replacing the Saw Blade ............. 19
8 Operating Instructions ................ 19
9 Use of Accessories ..................... 20
10 Maintenance .............................. 20
11 Environmental Protection/
Disposal.................................... 21
12 Warranty .................................. 21
13 Declaration of Conformity ............ 21
1 Symbols
Double insulation
Warning of general danger
Risk of electric shock
Wear ear protection!
Wear a dust mask!
Use protective gloves!
Read the instructions
Not to be included in municipal refuse
Advice or tip
2 Tool Speci cations
Nominal voltage 230 V ~
Mains frequency 50 / 60 Hz
Power consumption 1300 W
Rated rpm (no load) 2000 4700 min
–1
Speed pre-selection
Constant-Electronic •
Run-on Brake
Starting current limiting
Spindle locking button
Saw blade Diameter 160 mm
Hole 20 mm
Tooth width 2.5 mm
Blade thickness 1.6 mm
Cutting depth 90° 0 … 55 mm
45° 0 … 38 mm
Cutting angle 90° … 45°
Weight (without accessories) 5.1 kg
Protection class II /
3 Operating Controls
[1-1] Lock-off switch
[1-2] On/Off switch
[1-3] Spindle locking button
[1-4] Sawdust ejector
[1-5] Riving knife screw
[1-6] Lever for swinging guard
[1-7] Base plate
[1-8] Swinging protective guard
[1-9] Parallel guide
[1-10] Additional holder with lever
[1-11] Speed control
[1-12] Handscrew
[2-1] Allen key
[2-2] Clamping screw
[2-3] Clamping ange
[2-4] Saw blade
[2-5] Mounting ange
[2-6] Riving knife
[2-7] Motor spindle
[3-1] Clamping lever for cutting depth set-
ting
[3-2] Cutting depth scale
[4-1] Cutting edge indicator
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Protool CSP 56 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Protool CSP 56 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 11,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info