110274
11
Zoom out
Zoom in
Previous page
1/110
Next page
11
GB
Hand Circular Saw CSP 55-2
– original instruction
Table of contents
1 Symbols ................................... 11
2 Tool Speci cations ...................... 11
3 Operating Controls ..................... 11
4 Intended Use ............................. 12
5 Notes on Safety Prevention ......... 12
5.1 General Safety Instructions ......... 12
5.2 Safety Rules for Circular Saws ..... 12
5.3 Additional Safety Rules
for all Circular Saws ................... 12
5.4 Speci c Safety Rules
for CSP 55-2 Circular Saws .......... 13
5.5 Emission levels .......................... 14
6 Commissioning and Operation ...... 14
7 Adjustment ............................... 15
7.1 Cutting Depth Adjustment ........... 15
7.2 Cutting Angle Adjustment ........... 15
7.3 Cutting Edge Indicator ................ 15
7.4 Parallel Guide ............................ 15
7.5 Dust Extraction .......................... 15
7.6 Replacing the Saw Blade ............. 15
8 Operating Instructions ................ 16
9 Maintenance .............................. 16
10 Environmental Protection/
Disposal.................................... 16
11 Warranty .................................. 17
12 Declaration of Conformity ............ 17
1 Symbols
Double insulation
Warning of general danger
Risk of electric shock
Wear ear protection!
Wear a dust mask!
Use protective gloves!
Read the instructions
Not to be included in municipal refuse
Advice or tip
2 Tool Speci cations
Nominal voltage 230 V ~
Mains frequency 50 / 60 Hz
Power consumption 1050 W
Rated rpm (no load) 4700 min
–1
Saw blade Diameter 160 mm
Hole 20 mm
Tooth width 2.8 mm
Blade thickness 1.8 mm
Cutting depth 90° 0 … 55 mm
45° 0 … 38 mm
Cutting angle 90° … 45°
Weight (without accessories) 3.6 kg
Protection class II /
3 Operating Controls
[1-1] Lock-off switch
[1-2] On/Off switch
[1-3] Sawdust ejector / Connection neck
for dust extraction
[1-4] Riving knife screw
[1-5] Lever for swinging guard
[1-6] Base plate
[1-7] Swinging protective guard
[1-8] Grip
[1-9] Winged screw for cutting angle
adjustment
[1-10] Winged screw for parallel guide
[1-11] Cutting mark
[1-12] Winged screw for cutting depth
adjustment
[1-13] Scale
[2-1] Parallel guide
[2-2] Allen key
[2-3] Ring spanner
[2-4] Clamping screw
[2-5] Washer
[2-6] Clamping ange
[2-7] Saw blade
[2-8] Mounting ange
[2-9] Riving knife
[2-10] Motor spindle
Not all of the accessories illustrated or de-
scribed are included as standard delivery.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Protool CSP 55-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Protool CSP 55-2 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info