490682
14
Zoom out
Zoom in
Previous page
1/148
Next page
14
GB
Angle grinder AGP 230-26 R
– original instruction
Table of contents
1 Symbols ................................... 14
2 Tool Speci cations ...................... 14
3 Application ................................ 14
4 Controls .................................... 14
5 Safety instructions ..................... 15
5.1 Safety instructions for all work
activities ................................... 15
5.2 Other safety instructions for
all work activities ....................... 16
5.3 Additional safety instruction
for grinding and cutting work ....... 17
5.4 Additional safety instructions
for cutting ................................. 17
5.5 Additional safety instructions
to surface grinding ..................... 17
5.6 Additional safety instructions
for grinding with a wire brush ...... 18
5.7 Turner safety instructions ............ 18
5.8 Service ..................................... 18
5.9 Residual risk .............................. 18
5.10 Emission levels .......................... 18
6 Installation of protective
elements .................................. 19
6.1 Cover ....................................... 19
6.2 Auxiliary handle ......................... 19
6.3 Rotating handle ......................... 19
7 Fitting the grinding disc .............. 20
7.1 Assembly with the standard
clamping nut ............................. 20
7.2 Assembly with the FASTFIX
quick-action xing nut ................ 20
8 Activation ................................. 20
8.1 Switching on and off ................... 20
8.2 Continuous use .......................... 20
8.3 Control electronics ..................... 20
9 Work instructions ....................... 21
10 Maintenance .............................. 21
11 Environmental Protection /
Disposal.................................... 21
12 Warranty .................................. 22
13 Declaration of Conformity ............ 22
1 Symbols
Double insulation
Warning of general danger
Risk of electric shock
Use protective goggles!
Wear ear protection!
Read the instructions
Not to be included in municipal refuse
Advice or tip
2 Tool Speci cations
Voltage 230 – 240 V
Frequency 50 / 60 Hz
Power consumption 2600 W
Idle number
of revolutions
6600 min
–1
Grinding wheel max. 230 mm
Peripheral speed 80 m.s
–1
Grinding spindle thread M 14
Starting current reduction
Weight 5.9 kg
Protection class II /
3 Application
The tool is designed to be used for cutting,
grinding and brushing of metal and stone
materials without the use of water. To divide
stone it is necessary to use a guide rail or
a suction cover.
The user himself is liable for any improper
use.
4 Controls
[1-1] Switch
[1-2] Safety and locking button
[1-3] Arrest button
[1-4] Rotating handle
[1-5] Ventilation openings
[1-6] Locking plunger of the spindle
[1-7] Gear box
[1-8] Grinding spindle
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Protool AGP 230-26 R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Protool AGP 230-26 R in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info