738868
27
Zoom out
Zoom in
Previous page
1/88
Next page
Installation instructions for the
window transmitter
AS-F20 and the magnet (see figures 9 and 14)
Some points need to be explained and followed in
order to install the window transmitter and the magnet
to the top window frame and to the window
casements. The distance around all sides of the casing
parts must be less than 7 mm and the minimum
opening on the window (table 1) must be achieved.
Please use the included packing parts (U) in order to
adjust the height of the magnet.
NOTE
The window transmitter should not be installed
directly on a metal window frame as this can
reduce ranges.
PREPARATION
Minimum width of window opening
This is based on:
a) The performance of the exhaust air device in m³/h
b) The size of the window to be opened in m²
c) The size of the window opening in cm
(see table 1)
Most kitchens have rectangular tilt and swivel windows.
If you have windows that are, for example, round, then
please ask the installation technician, heating engineer
INSTALLATION
We recommend having the device installed by an
installation technician and heating engineer or by an
electrical installation technician. Correct installation
guarantees the long term, safe operation of the
exhaust air controller. The regional chimney sweep can
and should carry out a function test.
Installation instructions
AS-7000 central unit (receiver) (see figure 2)
Please proceed as follows to install the receiver:
1. Insert the power plug from the exhaust air device into
the socket on the AS-7020/30/40 central unit.
2. Attach the corresponding protective cap (figure S plug
guard) over the plug on the exhaust air device and
screw it in place. If it is not possible to install the plug
guard with the plug inserted then it may be necessary
to adjust the edges of the plug guard slightly or to have
an electrician attach a different plug.
3. Connect the AS-7020/30/40 central unit to the
power socket (power source). Following an internal
self-test the power LED will light up green and
operational readiness is signalled with a beep. For
further information on flashing and beeping patterns
please see the status and error reports.
EN
27
AS 7000_1.Vers. 2017 Manual 3xAA@150x180.indd 27 07.06.17 18:37
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Protector AS-7000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Protector AS-7000 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info