490662
17
Zoom out
Zoom in
Previous page
1/55
Next page
17
Controls
The default settings for the sun bed are for use with an external timer or for coin-operated use. If the
sun bed is used without an external timer or not coin-operated, and the internal timer needs to function,
the required tanning time should be set following the procedure described below.
Keep the “confi g” and the “increase body cooling” buttons pressed simultaneously for 10 seconds.
After 10 seconds, the display will show “SET 20”.
Pressing the “increase body cooling” button means the tanning time can be increased (max. 30
minutes)
Pressing the “decrease body cooling” button means the tanning time can be decreased.
Pressing the “start” button will confi rm the setting.
If the controls have been set for use with an external timer or coin-operated use, the display will
show an “A” after confi rmation.
If the controls have been set for use with an internal timer, the display will show an “H” after
confi rmation.
The sun bed will be started automatically if the external timer or coin-operated equipment
does not have a “remote start”. If there is a “remote start”, the sun bed must be started by
pressing the “start” button.
Note:
If the sun bed has an external timer or is coin-operated and does not have a “remote start”
function, but should be started by using the “start” button, your dealer will be able to set this
for you.
The equipment will pause when the “stop” button is pressed once. If stop is pressed more than
once, the equipment will remain paused. The sun bed will not stop until the tanning time is up.
Note:
A. If the sun bed is restarted within 3 minutes after stop has been pressed, it is possible
that the face tanners do not switch on.These need to cool down for at least 3 minutes,
after which they will switch on again automatically.
B. If the “stop” button is pressed, the airco will switch off after a 5 minute delay. Fol
lowing these 5 minutes, the airco also has a cooling down period of 3 minutes.
C. The tanning time will count up.
Decrease body cooling Increase body cooling
Config. Increase body cooling
Start
Note:
A. If it is necessary to cancel the confi guration, please press the “stop” button.
B. If no settings are entered for a time span of 30 seconds, the controls will be reset to
their original state.
C. A = automatic, H = manual
D. When an external timer is used or for coin-operated use, the tanning time must be set to 0 minutes.
Controls in combination with an external timer or for coin-operated use:
General
+
Start
A
Stop
B
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Prosun X5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Prosun X5 in the language / languages: English as an attachment in your email.

The manual is 3,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info