491322
40
Zoom out
Zoom in
Previous page
1/84
Next page
EN 13 Operation
be damaged which increases the chance
3.2 Igniting the burners
of injury when using the pan.
You can adjust each burner steplessly into
The i-Cooking appliance is fitted with a
any position in between the largest and
direct responding, electronic spark-
smallest flame, with exception of the wok
ignition. Igniting the burners is simple:
burner.
1. Push the gas knob down and turn it anti-
Wok burner
clockwise towards the highest flame size
The wok burner has a lock between the
indication. This automatically starts the
high and low flame sizes. To pass this lock,
ignition and gas supply.
the knob has to be pushed down first and
2. After ignition, the knob has to be pushed
can than be turned further.
down at least three seconds to prevent
After the lock is passed, the knob can be
that the thermo couple [auto-flame
released again to adjust the flame
detection] automatically switches off the
stepplessly within this range. Pushing
gas supply.
down the button is necessary when
3. The required flame size can be achieved
switching from the low flame size range to
by turning the knob.
the high flame size range, and the
otherway around.
In case the burner does not ignite
immediately, turn the knob again back into
3.4 Switching off the burners
the zero-position, wait one minute before
you retry and ventilate the room in the
meantime. If the burner should not ignite If the knob is turned into the zero-
after a second attempt, please consult the position, the gas supply is shut down and
Chapter „Useful tips“. the flame will extinct.
Your i-Cooking appliance is fitted with a
thermo-electrical auto-off-flame-safety; if
3.3 Adjusting the burner capacity
the flame extincts, for example in case of
overcooking, the gas supply will be shut
Adjust the burner so that no flames are
down too. By turning the knob again into
coming out of the underside of the pan.
the position, the safety lock is
The hottest end parts of the flames should
released. Now the burner can be switched
touch the bottom of the pan to realise a
on again as usual.
good warmth transfer. If the flames burn
outside the pan bottom, the pan grips can
EN 12 Operation
3.1 Symbols control knobs
Wok burner
Power |standard |simmer burner
1 Gas supply is closed
1 Gas supply is closed
4 Highest flame size
2 Highest flame size
inner and outer burner rings at highest
capacity
3 Lowest flame size
5 High flame size
outer burning ring at lowest capacity
inner burner at highest capacity
6 Low flame size
outer burning ring switched off
inner burner at highest capacity
7 Lowest flame size
outer burning ring switched off
inner burner at lowest capacity
Chapter 3
++
1
2
3
7
1
5
6
4
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Prosolo i-Cooking at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Prosolo i-Cooking in the language / languages: Dutch as an attachment in your email.

The manual is 2,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info