773036

Prophete Faltrad 2020 Manual

96
Zoom out
Zoom in
Previous page
1/288
Next page
38E N E N
SET THE PULL TENSION
When the chain gearshift is set incorrectly, it is often enough to only adjust the pull tension at the
left or right shifting grip:
1. Slightly tighten the screw
101
.
2. Check that the gears can be shifted cleanly. If this is not the
case, tighten the screw further. If necessary, also turn into
the opposite direction.
If the chain gearshift cannot be adjusted with the pull tension,
the gearshift must be readjusted.
SET THE SHIFTING GEAR
1. Switch the chain onto the largest chain ring and the small-
est sprocket of the rear derailleur.
2. Now turn the setting screw H
104
until the guide roller
105
is
placed precisely below the smallest pinion.
3. Switch the chain onto the smallest chain ring and the larg-
est sprocket of the derailleur.
4. Again, the guide roller must be placed precisely below the
pinion. If necessary, correct this with the setting screw L
103
.
Ensure that the chain never touches the spokes.
5. Adjust the pull tension with the setting screw
101
. The chain
must switch smoothly in both directions.
6. Use the setting screw B
102
to set the looping around the
pinion. On the larger pinion, the distance between the teeth
of the upper guide roller of the derailleur and the cassette
teeth should be five to seven millimetres.
SET THE FRONT DERAILLEUR
1. The guide plate of the front derailleur must be 2-3 millimetres above the teeth of the large
DANGER OF ACCIDENT!
• If the rear derailleur is not properly adjusted, there may be damage to the
chain and the rear derailleur. The rear derailleur may get into the spokes if
set incorrectly.
WARNING!
DANGER OF DAMAGE!
• If there are any grinding sounds at the front derailleur during the ride,
check the settings of the front derailleur at once. Otherwise, there may be
damage to the chain and the gearshift.
WARNING!
102
103
104
105
GEARSHIFT
… 96 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Prophete Faltrad 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Prophete Faltrad 2020 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 7.95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info