773036
81
Zoom out
Zoom in
Previous page
1/288
Next page
English
E N 23
LIGHTING •BRAKE
SETTING THE DYNAMO
1. Release the screw
50
.
2. Align the dynamo middle axis
49
with the wheel
axle.
3. Adjust the position of the dynamo so that the fricti-
on wheel
48
is flush with the tyre along its entire
width when the dynamo is switched on.
4. Tighten the attachment screw
50
again according to
the torque specification (s. chapter Torque specifi-
cations).
HUB DYNAMO
If the bicycle has a hub dynamic, you can switch the lamps on or off with the switch at the head-
light.
/
I
/ AN / ON Lamps on
0 / AUS / OFF Lamps off
AUTO Lamps switch on and off automatically via light sensor
BRAKE
DANGER OF ACCIDENT!
Safe handling of brakes is essential for your safety when cycling. Therefore,
become familiar with the brakes of your bicycle before your first ride.
Check the brakes for function before every ride. Incorrectly set or defec-
tively repaired brakes may cause reduced brake output or even complete
failure of the brakes.
The brake performance depends on many factors. It may reduce considerab-
ly, e.g. due to the ground properties (gravel paths, loose chippings, etc.), ad-
ditional payload, downhill rides or detriment weather.
Wet ground may cause the brake distance to be approx. 60% longer than on
dry ground. Therefore adjust your cycling behaviour accordingly. Ride more
slowly and with particular care.
Avoid sudden and strong braking to avoid slipping or blocking of the wheels.
Have maintenance work and repairs on the brakes performed only by suffi-
ciently qualified specialists. Incorrectly set or defectively repaired brakes
may cause reduced brake output or even complete failure of the brakes.
Replace brake components only with genuine parts, since only this can en-
sure proper function.
DANGER
48
49 50
81


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Prophete Faltrad 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Prophete Faltrad 2020 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 7.95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info