773031
99
Zoom out
Zoom in
Previous page
1/288
Next page
English
E N 41
CHAIN
ADJUSTING THE CHAIN TENSION
HUB GEARSHIFT WITHOUT SWITCHBOX
1. Release the axle nuts
117
on both sides of the rear wheel
with a 15 mm wrench.
2. Shift the rear wheel to adjust the chain tension.
3. Ensure that the wheel is placed straight in the holder and
that the chain is appropriately tensioned.
4. Attach the wheel with the axle nuts on both sides with a 15
mm wrench. Tighten the axle nuts according to the torque
specification (s. chapter torque specifications).
SHIMANO NEXUS INTER 3
1. Use the shifting lever to put in the 1st gear.
2. Release the attachment screw
118
.
3. Remove the switchbox.
4. Pull the switching pin that you can now see from the axle
bore.
5. Loosen the screw of the brake counter-holder
121
with a
screwdriver.
6. Release the axle nuts on both sides of the rear wheel with a
15 mm wrench.
7. Shift the rear wheel to adjust the chain tension. Ensure that
the wheel is placed straight in the holder.
8. Attach the counter-holder bracket with the pipe clamp screw
connection
121
at the frame.
9. Push the switching pin into the axle guide on the right to the
stop.
10. Push the switchbox onto the right axle nut as shown.
11. Fasten the switchbox with the lower attachment nut
118
.
12. Set the gearshift (s. chapter Gearshift).
DANGER OF ACCIDENT!
The rear wheel must be placed straight in the axle holder, since the braking
or riding performance may otherwise be impaired.
Tighten all screws and nuts that you loosened again well. Check that the
safety washer is placed correctly. The rear wheel may otherwise come
loose during the ride! Perform a careful test ride after installation.
DANGER
121
118 119 120
117
99


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Prophete Bike 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Prophete Bike 2020 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 7.95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info