773031
90
Zoom out
Zoom in
Previous page
1/288
Next page
32E N E N
WHEELS
REMOVING THE FRONT WHEEL
1. V-brake rim brake: Disconnect the brake cable
77
in order to
take out the wheel more easily later.
Hydraulic rim brake: Open the quick-clamping lever
80
of the
rim brake [OPEN].
2. Hydraulic rim brake: Take the brake cylinder
79
off the cantile-
ver socket
78
in order to take out the wheel more easily later.
3. Release the nuts that ensure tight fit of the front wheel with a
15 mm wrench (depending on design).
4. Take the nuts including washers off the axle.
5. Pull out the front wheel from the axle holder.
INSTALLING THE FRONT WHEEL
1. Insert the front wheel straight into the axle.
2. Push the washers and nuts onto the axle.
3. Tighten the axle nuts again with a 15 mm wrench (see chapter
on torque specification).
4. Place both caps onto the axle nuts.
5. V-brake rim brake: Connect the brake cable
77
again.
Hydraulic rim brake: Push the brake cylinder
79
back onto
the cantilever socket
78
.
6. Hydraulic rim brake: Close the quick-clamping lever
77
[CLOSE].
If the lever closes too easily, the quick-clamping screw must be
adjusted (see chapter Brakes).
7. Check that the rim brake works properly. Adjust it if necessary
(s. chapter Brake).
REAR WHEEL
The procedure for removing and installing the rear wheel depends
on the gearshift system installed (see chapter Gearshift).
77
78
79
80
90


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Prophete Bike 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Prophete Bike 2020 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 7.95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info