527018
11
Zoom out
Zoom in
Previous page
1/20
Next page
Mounting
The charger can be mounted with the delivered mounting- material.
TROUBLE SHOOTING
Problem (Possible) cause Action
‘Error’ lights on
reversed polarization of the
cables
Remove the connection and
attach the cables correctly
The battery is connected to the
charger and the charger does
not work
1. mains voltage is to low
or no mains voltage
2. weak or no connection
between the battery and the
charger
3. the charger is in a thermical
stop.
4. there is a battery separator
connected that blocks the
battery voltage
and prevents
that the charger becomes
active. The charger needs a
inverse voltage (from a battery)
before it switches on.
1. - Measure the mains
voltage. It should be higher
then 180VAC.
-
Check the fuse on the rear
side of charger.
2. check the connection and
the wires
3. the charging process will
continue automatically when
the charger has could down.
4. The charger needs a D+
connection for the battery
separator. Only this way it can
work without problems.
The battery is not connected to
the charger and you don’t
measure any voltage
The charger needs a inverse
voltage (from a battery) before
it works.
Connect a battery to the
charger
The red or yellow led continues
to burn
1. the battery is defective
2. There are heavy
consumers connected to the
battery.
3. battery is too heavy for the
charger
1. measure the acid and, if
necessary, replace the battery
2 and 3. connect a
heavier charger to the
battery
When the GBC 200 still is not functioning well after the actions stipulated, you may
return the charger to your retailer. The charger must be sent prepaid. Don’t try to
repair or open the charger yourself.
12
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Proosten GBC 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Proosten GBC 200 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Proosten GBC 200

Proosten GBC 200 User Manual - English, German, Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info