791716
254
Zoom out
Zoom in
Previous page
1/276
Next page
June 2022 244 Annex iii: SIGNAL COVERAGE OPTION
In case of tuning a DVB-T2 signal, in the Signal Parameters menu
select the Profile (Base or Lite) and the PLP identifier. User has to choose
one profile and one PLP identifier per each signal coverage analysis.
4 Press the Tools key .
5 Select the Signal Coverage option.
6 Select between monitoring one single channel or one channel plan.
7 The Signal Coverage function appears on screen.
8 Before starting the signal coverage analysis, access the Configuration
option in the Advanced menu for settings (for more details refer to next
section).
9 After settings, access the Advanced menu and press on Start to start
the signal coverage analysis. Before starting, it shows some warnings to
confirm signal parameters (signal locked or unlocked, bandwidth and
reference level) and if the file name already exists.
10 In Continuous mode, the equipment takes samples automatically
according to settings (see next section). In Manual mode each time the
user presses the joystick the equipment takes a sample. Measurement are
linked to the GPS reference.
11 Access the Advanced menu and press on Stop to finish the signal
coverage analysis. Data obtained is automatically stored.
12 After stopped, it gives the option to access the Signal Monitoring Viewer that
allows the user to watch the final results (for more details refer to Data
Viewer” on page 249).
13 You can also access data by pressing the Installation List key to check
that the monitoring data file has been saved. This file is a "Data Capture"
type. To manage the data, see below the section "Data File Processing".
254


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PROmax Ranger Neo Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PROmax Ranger Neo Plus in the language / languages: English as an attachment in your email.

The manual is 11.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info