791716
249
Zoom out
Zoom in
Previous page
1/276
Next page
Annex ii: WIFI 5 GHz+LTE 2.6 GHz+RF 6 GHz OPTION 239 June 2022
Operation
1 Connect the USB WiFi adapter (supplied) to one of the two USB ports on the
device. The "Wi-Fi Configuration" window pops up and it performs a Wi-Fi
scan showing all networks detected. The WiFi icon will appear at the top of
the screen. Press F1 to exit because it is not necessary to log in a WiFi
network to use this tool.
2 Connect the RF omni-directional antenna (supplied) to the RF input. This
antenna detects WiFi band spectrum.
3 Press "Settings" key to access Settings menu. In "Signal Source" select
"WiFi".
4 Press "Settings" key again, access "Band" option and select a band from
available WiFi bands.
5 Press the F1 “Tuning” key and on “Channel Plan” select the WIFI 5 GHz. In
case it is not avaiable, go to “Installations management” , press F2:
Manage and press F3: Installation. Press “Add Channel Plan” and select the
WiFi 5GHz channel plan.
6 To start monitoring, first select tuning mode wether to tune by access point
(AP) or channel (CH) using the F1 "Tuning" menu (enabled tuning mode is
shown on joytstick icon)
7 For more details about WiFi Monitoring refer to WIFI MONITORING” on
page 143.
Description
The 2.6 GHz LTE option expands the spectrum analyzer to the band 7 of LTE.
Band 7 is defined by an uplink band between 2.5 and 2.57 GHz and a downlink
band between 2.62 and 2.69 GHz.
Band 7 of LTE is one of the most used globally since it allows to transmit with
greater speed but at a shorter distance and is more exposed to suffer
interference.
Description
Follow the steps explained on LTE measurement section (LTE Signals” on
page 79).
ii.3 LTE 2.6 GHz
249


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PROmax Ranger Neo Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PROmax Ranger Neo Plus in the language / languages: English as an attachment in your email.

The manual is 11.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info