791716

PROmax Ranger Neo Plus Manual

183
Zoom out
Zoom in
Previous page
1/276
Next page
Chapter 9: WEBCONTROL 173 June 2022
► Operation
1 In “Monitoring type” box select “Signal Quality Monitoring”.
2 In “Monitoring” dropdown menu, select an existing monitoring or create a
new one by clicking "New". You can also import a monitoring (in zip format)
by pressing “Import” (this monitoring previously must be created and
exported using the “Export” option). In case the system detects a monitoring
that was not finished, then it allows you to load it in order to finish it.
3 If you create a new monitoring, a box will appear that allows you to select
the channel plan that you want to monitor.
4 Next, the "Name" box appears. Write a name to identify the monitoring (a
single word). In the "Description" box add additional information.
5 A list will appear with all channels in the channel plan. Alarms on each
channel are available to be set.
6 To set an alarm from a channel, click on the cross icon next to channel. It
drops down a list with all parameters available.
7 Each channel can be configured with this parameters:
Auto: The system automatically tunes the channel and takes
measurements and reports an alarm when the user-defined condition is
met.
Manual: The system tunes the channel and waits during a time defined by
user (in seconds). Then it takes measurements and reports an alarm
when the user-defined condition is met.
Cycles: The system reports an alarm when the user-defined condition is
met during a number of consecutive cycles defined by user. If this box is
empty is equal to 1 cycle.
8 When the channel is deployed, the alarm configuration will appear:
Status unlocked: This condition is always enabled and reports alarm when
the channel is unlocked.
Parameter: Parameter to monitor.
OVER / UNDER: It indicates the condition to met in relation to the user-
defined value.
Pre-alarm: Press on the switch and enter the value so when the condition
is met it reports a pre-alarm. Value must be in decimal notation.
Alarm: Press on the switch and enter the value so when the condition is
met it reports a pre-alarm. Value must be in decimal notation.
9 Configure each channel to be monitored.
10 When configuration is finished, press on “Save”.
… 183 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PROmax Ranger Neo Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PROmax Ranger Neo Plus in the language / languages: English as an attachment in your email.

The manual is 11.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info