791716

PROmax Ranger Neo Plus Manual

154
Zoom out
Zoom in
Previous page
1/276
Next page
June 2022 144 Chapter 6: WIFI MONITORING
through signal coming from the RF input. So it shows any signal using this
band, not only WiFi signals (for more details refer to next section).
6 To display Access Points information, press Measurement key . Press
"Advanced" key (F4) for more details about access points (for more details
refer to next section).
7 To display the WiFi spectrum screen again press Spectrum key .
8 To start monitoring, select tuning mode wether to tune by access point (AP)
or channel (CH) using the F1 "Tuning" menu (enabled tuning mode is shown
on joytstick icon). Then enter an access point or channel or navigate left /
right through the access points / channels. Define the workspace using the
span to focus on the desired APs.
9 To return to RF signal source press "Settings" key to access the Settings
menu and in "Signal Source" option select "RF".
To connect to a WiFi access point you need to log in that network. Configuration
window is available when the USB WiFi adapter is connected to the device. It
shows up right after is connected. It is also available as an option in "Tools"
menu (F3 key).
WiFi settings are:
Band*: Select the WiFi frequency band where to scan networks.
DHCP: Enable this option to get automatically the proper IP address when
the unit is first connected to your network. This option works if your router
has enabled the DHCP protocol. Enable the DHCP protocol for proper IP
configuration. If DHCP is OFF you should enter data in next fields.
IP Address: IP address of the meter into the local network.
Mask: Subnet mask of the equipment (usually 255.255.255.0).
Gateway: It allows the meter to get out from the local network (if the
network does not have gateway, use 0.0.0.0).
6.3 WiFi Access Point Connect
*. 5 GHz WiFi band available as an option for RANGER
Neo
+
… 154 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PROmax Ranger Neo Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PROmax Ranger Neo Plus in the language / languages: English as an attachment in your email.

The manual is 11.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info