791716

PROmax Ranger Neo Plus Manual

78
Zoom out
Zoom in
Previous page
1/276
Next page
June 2022 68 Chapter 4: RF SIGNAL TUNING
► FULL SPECTRUM (SPECTRUM 3/3) WITH MARKER
Figure 49.
1 Horizontal reference line: It shows level of signal.
2 Vertical axis: It indicates the signal level.
3 Vertical reference line: It indicates the frequency.
4 SPAN: It is the frequency range displayed on the horizontal axis. Span values
available changes according to Resolution Bandwidth selected. The current
span value appears at the bottom right of the screen. To switch among span
default values use the joystick (left, right) in span mode (SP). For example,
for RBW = 100 kHz default span values are Full (full band), 500 MHz, 200
MHz, 100 MHz, 50 MHz, 20 MHz and 10 MHz. To change to any other span
value in that frequency range use the "span" option in the Tuning menu (
key).
5 Reference Level: It is the power range represented on the vertical axis. To
change use the joystick (up, down; 5 dB steps). This equipment has an option
to activate the automatic adjustment of the reference level, so it detects the
optimal reference level for each situation. In automatic mode, it sets the
optimum reference level each time it enters the spectrum mode. This option
can be enabled or disabled through the PREFERENCES menu and
Measurements tab.
6 Cursor: Red vertical line that indicates position during the channel or
frequency tuning. When a digital signal is detected, there is a triple cursor
that shows the frequency for the signal locked and two vertical lines that
shows the bandwidth of the digital carrier. In the case of a GENERIC signal,
the bandwidth shown is the one selected by the user on the "Signal
Parameters" menu when pressing the key. To change frequency/channel
… 78 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PROmax Ranger Neo Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PROmax Ranger Neo Plus in the language / languages: English as an attachment in your email.

The manual is 11.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info