791716
70
Zoom out
Zoom in
Previous page
1/276
Next page
June 2022 60 Chapter 4: RF SIGNAL TUNING
Vertical Range: It allows setting the vertical scale on screen. Available
values are 1, 2, 5 and 10 dB per division.
Dashed BW: When it is ON the channel bandwidth area is hatched by
lines.
Reference: (Set / Clear). It memorizes the current trace on screen, which
can be used as a reference for further comparison. It may be also very
helpful for visually measure the gain or attenuation in a TV distribution
network. To delete the reference, select the "clear" option. The trace can
be also captured by a short press on the export key in the Spectrum
Analyzer mode. Pressing short again on the export key it clears the
reference.
Start Zoom (this function must be previously enabled on Preferences ->
Tools): It automatically sets parameters from the Spectrum mode in order
to analize small signals. Applied settings are:
•Span: 200 kHz.
•Resolution filter: 12.5 kHz.
•Reference level: minimum.
•Measurement units: dBm
Advanced Menu in TV Mode:
Analogue Signal: This option is available only if the detected or selected
signal is ANALOGUE. Pressing the key it allows you to select the source
for the analogue signal between antenna (via RF connector) and external
(via V/A input connector). To get an external analogue signal use the A/V
input.
Aspect Ratio: This option is available only if the detected or selected signal
is ANALOGUE. It allows the user to select the image aspect ratio (4:3;
16:9). It remembers this selection even after switch off.
Advanced: This option is available only if the detected or selected signal is
DIGITAL. There are these options:
•Audio: It allows the user to select among the audio tracks available.
•TS Data: It shows the IRG data descriptor. If the signal contains this
carrier identifier, this option will be enabled. If the signal does not contain
this identifier, the option will be disabled (for more information refer to
IRG Descriptor” on page 78).
•Discovered URLs: If shows the URL related to the interactive service.
NOTE: Some parameters such as average, spectrum line, tone level and marker
are recovered after switching on.
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PROmax Ranger Neo Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PROmax Ranger Neo Plus in the language / languages: English as an attachment in your email.

The manual is 11.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info