791716

PROmax Ranger Neo Plus Manual

61
Zoom out
Zoom in
Previous page
1/276
Next page
Chapter 4: RF SIGNAL TUNING 51 June 2022
►Channel Plan
This option allows the user to select a channel plan from the ones available for
the current installation.
►Tune by
It allows the user to select between tuning by channel (selecting a channel or
channel by channel with the joystick) and tuning by frequency (selecting a
frequency or step by step with the joystick).
In case of tuning by channel:
1 Place over the Channel option and press the joystick.
2 A box appears with all channels of the active channel plan and its frequency.
3 Move the joystick on the box to select a channel.
4 After finished press the joystick to save the selected value or any function
key to exit without saving.
5 The cursor will place on the selected channel and it will appear on the
option.
•Channels can be changed directly with the joystick in CH mode.
In case of tuning by frequency:
1 Place over the Frequency option and press the joystick.
2 The option is highlighted in yellow to indicate it is in edit mode.
3 Move the joystick left/right to move between the figures and up/down to
change the figure.
NOTE: When using tune by channel on satellite, the polarity parameters
(horizontal/vertical and left/right) and satellite band (high/low) are
selected automatically by the equipment, according to the channel plan
enabled and cannot be changed by the user. To change these
parameters, the user may switch to frequency tuning. But the user can
change the voltage output while in a channel plan, as long as none has
been defined in that same channel plan. For instance, if a standard
channel plan is being used like the CCIR, there is no need for switching
to frequency tuning mode.
… 61 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PROmax Ranger Neo Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PROmax Ranger Neo Plus in the language / languages: English as an attachment in your email.

The manual is 11.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info