791716

PROmax Ranger Neo Plus Manual

55
Zoom out
Zoom in
Previous page
1/276
Next page
Chapter 3: SETTINGS AND PREFERENCES 45 June 2022
►Measurement Options
Terrestrial Units: It allows the user to select the terrestrial measurement
units for the signal level. Available options are: dBm dBmV and dBµV.
Satellite Units: It allows the user to select the satellite measurement units
for the signal level. Available options are: dBm, dBmV and dBµV.
Optical Units: It allows the user to select the optical measurement units
for the signal level. Available options are: dBm.
Satellite Band: It allows the user to select the type of satellite band used
between Ku/Ka band and C band.
Reference Level: It allows the user to select the type of reference level
adjustment between manual (modified by the user) or automatic (selected
by the equipment).
TER. Downlink: If this option is enabled it allows you to set a local
oscillator in terrestrial band from Settings and it displays intermediate
and downlink (DL) frequencies calculated from local oscillator. For
example, it allows you to work with terrestrial radio-links or frequency
converters.
Position Tone: The user can select where at the voltage to insert a 22 kHz
tone: Up, Center or Down. The tone will be inserted on the top, in the
center or below the LNB tension respectively.
Min. TER. Power: It sets the minimum power for a terrestrial digital signal
to be identified when channel exploring.
Min. SAT. Power: It sets the minimum power for a satellite digital signal to
be identified when channel exploring.
Min. TER. Level: It sets the minimum level for a terrestrial analogue signal
to be identified when channel exploring.
Min. FM Level: It sets the minimum power for a FM signal to be identified
when channel exploring.
Input Impedance: It allows the user to select the impedance at the RF
input between 50 Ω and 75 Ω.
Power Offset: It adds this value to the power/level measurement. When
this value is different to 0 dB, next to power/level measurement an
asterisk (*) is shown as a warning that offset is been applied.
►Tools Options
Datalogger PSI: If you select the option "Capture", when datalogger is
working it captures the service list of each channel. This process slows the
datalogger, but provides additional information that can be downloaded in
XML files. To disable this option select "Don't capture".
Database Services: When it is enabled, it saves all the services been
detected in the current installation. There is a database for services in
… 55 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PROmax Ranger Neo Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PROmax Ranger Neo Plus in the language / languages: English as an attachment in your email.

The manual is 11.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info