791716

PROmax Ranger Neo Plus Manual

46
Zoom out
Zoom in
Previous page
1/276
Next page
June 2022 36 Chapter 2: SETTING UP
15 The meter detects automatically all the parameters for the signal and shows
on screen the main measurements.
1 Connect the RF input signal cable to the RF input connector of your
equipment.
2 Press the Preferences key for 1 second.
3 Access the tab “Stealth ID” to use the automatic identification feature.
4 Select the type of signals you want to identify when the meter is searching
a signal. Press “Save” and “Exit”.
5 Press the Settings key. At “Source of signal” select RF. At “Band” select
Satellite.
6 If you want to use a rotor to move the satellite dish, press the Settings
key and enable the option “Supply output”. Then select the communication
protocol you are going to use to send commands to the rotor (DiSEqC, SCD,
SCD2).
7 Press the Spectrum key. The signal spectrum appears on screen. Press
again this key to switch among views. Select the SPECTRUM 1/3 view.
8 Press the joystick to change to SP mode. In this mode, when moving left or
right it changes the Span. The recommended value for a satellite signal is
100 MHz. The span value is shown at lower right corner. Once is selected,
press again the joystick to return to Tune mode.
9 Press the joystick up or down to adjust the reference level.
10 Press the key and in the “Tune by” option select if you want to tune by
frequency or by channel.
11 If you select the option tune by frequency, press the Settings key and
select the settings parameters: Supply voltage, polarization and satellite
band.
12 If you select the tune by channel option, then select in “Channel plan” a
proper channel plan according to your area. Channels from channel plan
have pre-set parameters (supply voltage, polarization and satellite band),
so they cannot be changed from the Settings menu.
13 In case you do not find a proper channel plan, you can add or create a new
channel plan using one of this tools:
•Press -> : Manage -> F3: Installation -> Add Channel Plan.
•F3: Tools -> Explore Channel Plan.
•WebControl -> Installations management -> Create a Channel Plan.
14 Press and confirm StealthID is enabled (On).
2.9.2 RF Satellite signal tuning
… 46 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PROmax Ranger Neo Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PROmax Ranger Neo Plus in the language / languages: English as an attachment in your email.

The manual is 11.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info