791719

PROmax Ranger Neo 4 Manual

327
Zoom out
Zoom in
Previous page
1/345
Next page
June 2022 315 Chapter iv: HIGH FREQUENCY OPTION
iv HIGH FREQUENCY OPTION
This annex contains operating instructions for the next option:
OP-00x-AF: High Frequency measurement.
This option increases accuracy when measuring frequency.
1 Connect the RF input signal to the equipment.
2 Press the Settings key to access the Settings Menu and in “Signal Source”
select “RF".
3 From Settings menu access the “Band” option and select “Terrestrial” to
work on terrestrial band or “Satellite” to work on satellite band.
4 Press the Spectrum key to get into the SPECTRUM ANALYZER mode. If
you press this key repeatedly you could see different views of a signal.
5 Press the key to enter the “Tuning” mode and in “Tune by” option select
“By frequency”. Then, on option “Frequency” enter your frequency or move
left/right along the frequency band.
6 If you have a reference signal of 10 MHz, you should connect it to the 1PPS*
input.
7 When connecting the external reference signal it should appear on screen
this message “Tuning external reference”. If it is successfully tuned, it will
appear on screen the “Ext Ref” icon on the top right corner.
8 Press the key to access the Advanced menu and on “Marker” option select
ON.
9 The marker is displayed on screen as an arrowhead, showing on a window
some information about the frequency and power level where it points. You
can move the marker left/right when the marker is in MK mode (to do so,
press the joystick until the MK icon appears).
10 The frequency on the marker’s window has an accuracy of ±1 kHz (3
decimals). When using an external reference signal of 10 MHz, accuracy
reaches ±250 Hz (6 decimals).
iv.1 Operation
*. For the RANGER NEO 2 it is labeled as EXT REF.
… 327 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PROmax Ranger Neo 4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PROmax Ranger Neo 4 in the language / languages: English as an attachment in your email.

The manual is 16.35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info